bonnet not sitting properly

[r_dizzel*]

quite a while back someone reversed into the front of me.. leaving me to replace my bonnet and since then its not been sitting properly... "theres a quite a wide gap between the headlight and bonnet"

today i took a look at the front panel and it seems fine

ive also tried adjusting the bonnet.. but still i have no luck with getting it to sit properly..

could someone tell me what else i could check?

 

[JCC]

If you've tried taking the bolts out the bonnet and moving it about then re-bolting, and it's still not sitting properly, then something is bent somewhere. Probably either the brackets or the slam panel.

 

[r_dizzel*]

someone said to me .. for £150 they would sort it . but when i asked.. they wouldn't tell me what the problem was :|

dont want to play around too much myself so i might just get it done or ask other garages

thanks for the help though mate

 

[Final Maxim]

got pics?

try screwing the rubber bungs all the way in.

is it flush to the wings both sides at the front and at the back?

 

[r_dizzel*]

the bungs are fine

would do you mean ^^ ??

pix

 

[keith evans]

the front panel is pushed back im afraid

 

[StevieG-09]

mine sits like this after i had a bump a while back
I cant sort it either

 

[r_dizzel*]

the front panel is pushed back im afraid

roughly how much am i looking to fix this?

 

[bmh.01]

If its just the slam panel then its bolt in, finding one in the right colour will be a little more fun though. Would be a couple of hundred to source a new one and spray i'd have thought.

 

[keith evans]

its the headlight panel not the front slam panel it needs pulling forward so the h light lines up with the bonnet edge

 

[r_dizzel*]

could i do this myself?^

 

[keith evans]

body shop would be best if you dont know which is h light panel and which is slam panel

 

[r_dizzel*]

ok.. i think your right though as one headlight is move forward on the bumper then the other

 

[r_dizzel*]

if its the slam panel; can i fit this myself?