Buffing pads

[imprezaworks]

I'm after a heavy cut pad.

We use autosmart in work and wondered if they are any good?.

Waiting on a Chem guys pad but it's not here until Monday, I'm impatient.

Or the likes of amazon any good?

@Daniel @Knuckles

 

[MartinL1993]

Meguirs microfibre? Or one of there cutting pads?

 

[Gus]

Menzerna white heavy cutting pad is my favourite. Far better than a yellow hexlogic . It retains its stiffness (lol) and saves loads of time of you are using a DA.

 

[imprezaworks]

Yeah sorry, on a das pro

 

[MartinL1993]

I'm really liking meguirs like I say
But that being said I have struggled for a while with anything softer for finishing like auto finesse or chemical guys as my da just seems to bog down except the meguirs one, Das6 pro aswell

 

[imprezaworks]

Got a couple of chem guys pads on route, but was after something to try now lol. Free weekend and all that

 

[MartinL1993]

You not got any shops nearby?
I know the nearest serious one for me is quite far away still

 

[imprezaworks]

Like where mate?. Will ring autosmart tomo and see if they have much.

 

[MartinL1993]

WHere are you based?

 

[imprezaworks]

On The Wirral mate

 

[MartinL1993]

Honestly don't know of a great deal over that way
They are few and far between at the best of times, only shop I know of anywhere close to that is the polishing booth but that's Preston way and along way out Anywhere offer same day delivery these days?

 

[Knuckles]

I'd just wait until the chemical guys stuff come.

Or go to demon tweaks?

I've only just switched to the chemical guys pads and after the correction I got on the m3 with a da I don't think I'll be switching from them any time soon lol

 

[imprezaworks]

Cheers. I can wait until Monday but was hoping to get something tomo or Saturday.

 

[Knuckles]

Go to tweaks, screwfix, Cromwell, jr websters etc. I think they all stock pads. Find something quite firm with close packed foam, should be reet really

This was what I used on the Beamer, that menz polish stays oily forever and doesn't dust like auto finesse/farecla compounds

 

[imprezaworks]

I'd just wait until the chemical guys stuff come.

Or go to demon tweaks?

I've only just switched to the chemical guys pads and after the correction I got on the m3 with a da I don't think I'll be switching from them any time soon lol

Yeah saw that. I used the orange pad, but fooked it, don't ask. Was doing well until that point lol

 

[imprezaworks]

 

[Knuckles]

Holy s**t! How did you do that?!

 

[Gus]

Menzerna heavy cut compound is brilliant in @Knuckles post.

If you have any ECP near you they sell the meguiars heavy foam pads

 

[MartinL1993]

Menzerna heavy cut compound is brilliant in @Knuckles post.

If you have any ECP near you they sell the meguiars heavy foam pads

I thought this
But I went online and had a look and it says none stock item which I thought was strange

 

[bloke]

autosmart are just round the corner from me.

 

[imprezaworks]

Gonna ring the rep tomo

Right the pad. Was doing the roof, forgot my tape so thought I know put a drying cloth there, will be careful. Mmm.

 

[imprezaworks]

Menzerna heavy cut compound is brilliant in @Knuckles post.

If you have any ECP near you they sell the meguiars heavy foam pads

Yeah we use them. Which pad, will ring them.

 

[imprezaworks]

Holy s**t! How did you do that?!

Was fine until then lol

 

[bloke]

shoot down there first thing, they are usually in around 8:00 for a bit.

 

[imprezaworks]

Will give them a buzz when I get to work mate

Had a quick mooch online, couldn't see much.

 

[bloke]

don't think they have much at all online. can't remember the guys name but he's decent, him and his son run it.

 

[imprezaworks]

Yeah mark is his lad?

 

[bloke]

yeah, that's him.

 

[bloke]

is it bill his dad?

 

[imprezaworks]

Yep. We have a new rep so will give him a buzz

 

[imprezaworks]

Picked one up from autosmart, £5.

Will see what it's like later or tomo after work