Caliper bleed nipples part number request

[MullyBaby]

Hi,

As above, I am refurbing my calipers all round and want to replace the nipples :clown:

Does anyone have the part numbers for the front and back and a rough cost?

On a side note, I would also like new caliper to carrier bolts front and back, any part numbers for them?

Thanks in advance!

 

[MullyBaby]

Anyone?

 

[Tony Hunter]

I could actually do with some bleed nipples for the rear of our race car,good shout.

 

[maynard]

from what i can make out in the picture it's number 3, part number 77 01 071 172:

 

[Tony Hunter]

Hero,I'll check with Renault tomorrow.

Cheers.

 

[maynard]

no worries tony!

 

[MullyBaby]

Thanks Maynard! I'm guessing they are the same on the front?

Any chance of a part number for number 6 there? Probably the same on the front those bolts as well.

 

[regi james]

don't buy them from renault there £12 each go to a motor factors and get the peugeot/renault ones for £0.50 each:approve: there are only a couple of sizes can't remember off hand

 

[maynard]

Thanks Maynard! I'm guessing they are the same on the front?

Any chance of a part number for number 6 there? Probably the same on the front those bolts as well.

Number 6 is 77 01 025 057 priced at £1.63.

And yeah, it's the same for front and rear.

 

[MullyBaby]

Thanks again Maynard!


Might go for these nipples if Renault want £12!

http://cgi.ebay.co.uk/Hydraulic-Bra...280694459QQcategoryZ27377QQvarZQQcmdZViewItem

 

[regi james]

Thanks again Maynard!


Might go for these nipples if Renault want £12!

http://cgi.ebay.co.uk/Hydraulic-Bra...280694459QQcategoryZ27377QQvarZQQcmdZViewItem

thats what i got quoted from wests of kings lynn. so would be interesting to see what other people get quoted

 

[Tony Hunter]

I've just checked with Renault for these nipples,even with my discount £8.20 inc vat!!!

 

[Cupman29]

Does anyone know the thread of the bleed nipples?

When I was bleeding my brakes recently I noticed that one of the rears never had a hole in it for some reason.

 

[bozothenutter]

get some stainless ones, they won't rot solid....
it is a generic part, so no renault parts needed.

or maybe titanium ones?

http://www.aliexpress.com/product-gs/374137158-Gr5-titanium-bleed-nipple-M8X1-25mm-wholesalers.html

 

[Tigger]

Doing my calipers too with a re-seal kit from Bigg Red and found these as some of those links are out-dated
http://www.ebay.co.uk/itm/BRAKE-BLE...599?pt=LH_DefaultDomain_3&hash=item2ebc779e8f


Are they the right ones?

 

[Matt e]

No you need m7x1 not m6

I used these

http://www.ebay.co.uk/itm/281082991634?redirect=mobile