Cam pulleys locking tool

[vjs]

Bought this kit on eBay:

http://www.ebay.co.uk/itm/US-PRO-En...t=UK_Hand_Tools_Equipment&hash=item3a86c56891

Question is on how to fit in the cam pulleys tool? I tried in several positions - did not fit

Any link or photo would be very helpful.

 

[ciaran1380]

did you get a extra gear with the locking tool? You need a long one for the 182 anyways, got caught out myself with genuine tools , was told they were the right ones, they were missing this extra gear, had to source one elsewhere. When you get that its obvious how it fits on

 

[vjs]

Seams I fucked up with the 1.4/1.6 locking tools
I suppose this one I need:
http://www.ebay.co.uk/itm/RENAULT-M...Air_Tools_and_Compressors&hash=item257e4e02ba

 

[vjs]

did you get a extra gear with the locking tool? You need a long one for the 182 anyways, got caught out myself with genuine tools , was told they were the right ones, they were missing this extra gear, had to source one elsewhere. When you get that its obvious how it fits on

Mine is 172 ph1. Do I need set with an extra gear as well?

 

[AlexW]

Wrong tool for the sports.

 

[vjs]

the first one or the second link as well???

 

[ciaran1380]

the first one or the second link as well???

http://www.ebay.co.uk/itm/RENAULT-M...tem257e4e02ba&clk_rvr_id=550082335239&afsrc=1

link you posted 2nd is correct tool.

 

[AlexW]

Was only two posts when I replied.

Second tool is the one you need.

 

[vjs]

Thank You.

 

[Dan@SJM]

Those ones will bend too.

 

[vjs]

Those ones will bend too.

So You mean only OEM Renault tool will be OK?

 

[AlexW]

I've used all non-genuine tools, just don't apply too much pressure on them, and prepair to straighten the horse-shoe all the time.

 

[VikkiB]

So You mean only OEM Renault tool will be OK?

Yes. It's made from hardened steel not aluminium. Dan's got one in his box that he show to customers who don't believe how easy it bends.

 

[vjs]

Ok. What is the part number of Renault original one?

 

[MicKPM]

Yes. It's made from hardened steel not aluminium. Dan's got one in his box that he show to customers who don't believe how easy it bends.

I bent one in a vice to use as a Grp N tool - no real effort required