ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

car back from gdi



Status
Not open for further replies.
  Meg 230 f1
got car back today very happy with the work that was done nice one andy, just got to get it on a rolling road and see what my power is :)
 
  340i
But surely they would run it on the rolling road before to give a base figure...

Then after to show the improvement/gain in BHP over your base figure?
 

Ali

  V6, Trackhawk, GTS
cam package and they couldn't be arsed putting it on the rollers...Hardly promotes consumer confidence does it!
 
Are GDi using generic ECU maps on their cam package?? Thats the only explanation i can see to the answer he gave you about it 'not needing to'.

If you havent got a power figure now id lay money on you'll never get one
 
  LY 182
most tuners do a power run before starting
make sure they arent trying to tune a fcuked engine.
 

Coby.

ClioSport Club Member
  XC60-R.......V40-R
If it says RR on the package Description then surely they should do it otherwise they should remove it from their Site
 
most tuners do a power run before starting
make sure they arent trying to tune a fcuked engine.

Point is GDi state they include a rolling road session and the lad says he never got one. Thats the issue

The before result is not stated so thats fine and in anycase this is usually extra from most tuners
 
  340i
yeah think they need to remove it, hopefully the gains are what they say they are

hopfully lol...

I wouldnt spend over a £1000 on engine work and think hopefully it will be ok?


But anyway how does the car drive compared to how it was before, does it feel better? are you pleased with the "results"?
 
  A4 Avant
If your happy with the way car feels now and it's quicker then I wouldn't care what the rollers say!

Mine put out 197bhp with just remap, inlets matched, decat, caf removed and S/S exhaust. Yeah right!
 

Coby.

ClioSport Club Member
  XC60-R.......V40-R
It will just be drivability improved and Mid-Ranged Torque that will have increased noticably with this package isn't it??........I'm no mechanic :S

It should probably just pull a little better and have a smoother power delivery compared to std
 
  340i
It will just be drivability improved and Mid-Ranged Torque that will have increased noticably with this package isn't it??........I'm no mechanic :S

It should probably just pull a little better and have a smoother power delivery compared to std

A typical text book answer ;)
 

Coby.

ClioSport Club Member
  XC60-R.......V40-R
:D I'm learning... CS teachings are making me seem so clever LOL
 
  GDI Demo 182, Rsi Spider
its a set package..

tuned ecu to suit the cams and inlet match

the cams are a set profile.. CAT 428's

its the same package that we have been selling for 3yrs now.

greg is happy with the car and the way it drives... that is all i am interested in...
 

Ali

  V6, Trackhawk, GTS
1/4 won't show very much! It should feel better!!! If it doesnt then i'd be pissed off esp for the cash paid!!! My old one was 192.6 and it was faster but no eye watering!
 

Ali

  V6, Trackhawk, GTS
its a set package..

tuned ecu to suit the cams and inlet match

the cams are a set profile.. CAT 428's

its the same package that we have been selling for 3yrs now.

greg is happy with the car and the way it drives... that is all i am interested in...

As a customer i would 'expect' a power run...Just like when you buy a house you'd expect a survey to be carried out!

All part of a turnkey service imo!
 
  TVR Cerbera
If your happy with the way car feels now and it's quicker then I wouldn't care what the rollers say!

Mine put out 197bhp with just remap, inlets matched, decat, caf removed and S/S exhaust. Yeah right!

agree with the 'don't believe the rollers'

especially as yours is 'meant' to have 197bhp
 
  TVR Cerbera
its a set package..

tuned ecu to suit the cams and inlet match

the cams are a set profile.. CAT 428's

its the same package that we have been selling for 3yrs now.

greg is happy with the car and the way it drives... that is all i am interested in...

As a customer i would 'expect' a power run...Just like when you buy a house you'd expect a survey to be carried out!

All part of a turnkey service imo!

TBH what do you expect from 1.5k?
Cams are best part of £600
Ecu tune ? 3-400
inlet match 150?
Labour 6hrs?
+vat
(These are all guesses cos mine cost in excess of 6k and i only have 233bhp)

my RR bill was £490 alone

and don't you pay extra for your house survey?
 
Last edited:
Status
Not open for further replies.


Top