Cartek GT battery isolater in a 197

[Ads29]

I've recently taken on the maintenance of a friends 197 track car, that's 99% race ready. The last bit is the battery isolater, a Cartek GT, which needs to run a power feed to the ECU.

Unless I've missed something obvious on here I don't seem to be able to find any wiring diagrams/ECU pinouts so wondered if anyone had any or knows which wire is the power feed to the ECU.

Thanks
Ads

 

[robzracing]

Are you referring to the white wire out of the isolator?


Sent from my iPhone using Tapatalk

 

[AdamCup]

Can't you use the ignition wire instead of the ECU power ?

 

[robzracing]

Are you referring to the white wire out of the isolator?


Sent from my iPhone using Tapatalk

Ignore me, I'm getting mixed up with the XR.

 

[Ads29]

Can't you use the ignition wire instead of the ECU power ?

Quite possibly, I haven't yet seen it in person to have a proper look at, I'm just going by what I've been told so far. My 172 currently utilises an armtech cutoff, although with it's current rewire that'll go to an XR from cartek.

I was hoping to come across some wiring diagrams so I'd at least have an idea of what's what

 

[Ads29]

Ignore me, I'm getting mixed up with the XR.

No problem Rob, I've got an XR to go into my rebuild, but as above if I can come across some wiring diagrams I'd be pretty grateful

 

[AdamCup]

 

[AdamCup]

I've got the GT and mines wired to the ignition.

https://www.cartekmotorsport.com/wp...9/CARTEK-BATTERY-ISOLATOR-GT-Instructions.pdf