ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
Due to ongoing maintenance work some features and functions (including Dark mode!) may be unavailable or visually appear differently.
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Climate Control
- Thread starter MatthewR
- Start date
Fletcher
ClioSport Club Member
I wouldn't bother.
Matt e
ClioSport Club Member
more hassle than what its worth
Black Gold Trophy
I've done the conversion into a 182 Cup, it is ALOT of work, but I chose to fit automatic lights/wipers at the same time.
If you have a dynamique though (auto lights/wipers iirc), you probably have an 'N3' specification UCH, so it wouldn't be as much work for you as it was for me.
If you have a dynamique though (auto lights/wipers iirc), you probably have an 'N3' specification UCH, so it wouldn't be as much work for you as it was for me.
Black Gold Trophy
Just ask if you need more info, just bear in mind though the minimum you will have to do is:
Swap the dash loom, swap the loom in the scuttle panel, swap the fan housing and replacing the fan with a climate control spec one (which necessitates degassing the aircon and regassing it again), swap the air distribution box (which means draining the coolant to remove the heater matrix) and fitting the interior light panel with the sensor for the climate control.
It is alot of work but if you can get the parts cheaply enough, it's worth it imo. I had already done so much work to my girlfriends 182 cup that it was less work for me to fit all the FF extras than to remove all the tasty bits, sell up and buy a FF that was in as good condition as her car and then swap all the bits over.
I got all the bits from Budgie and SirDave on here, they break these cars quite regularly and were a great help when it came to getting hold of the bits.
Swap the dash loom, swap the loom in the scuttle panel, swap the fan housing and replacing the fan with a climate control spec one (which necessitates degassing the aircon and regassing it again), swap the air distribution box (which means draining the coolant to remove the heater matrix) and fitting the interior light panel with the sensor for the climate control.
It is alot of work but if you can get the parts cheaply enough, it's worth it imo. I had already done so much work to my girlfriends 182 cup that it was less work for me to fit all the FF extras than to remove all the tasty bits, sell up and buy a FF that was in as good condition as her car and then swap all the bits over.
I got all the bits from Budgie and SirDave on here, they break these cars quite regularly and were a great help when it came to getting hold of the bits.
