Clio 182 Driveshaft

[Digger Davo]

Apologises if this has been covered before but is there any difference between a non cup and cup drivers side driveshaft apart from the width of the abs ring, and the part number?

 

[imprezaworks]

@STEVE.M

 

[flebay]

Apologises if this has been covered before but is there any difference between a non cup and cup drivers side driveshaft apart from the width of the abs ring, and the part number?

phs 2 182 cup chassis

passenger 8200372167
driver 8200372166

phs 2 182 non cup

passenger 8200352043
driver 8200352042
There a different length, if it was just a case of the abs rings being wider on the cup then they could of just used the same on non cup.

 

[STEVE.M]

phs 2 182 cup chassis

passenger 8200372167
driver 8200372166

phs 2 182 non cup

passenger 8200352043
driver 8200352042
There a different length, if it was just a case of the abs rings being wider on the cup then they could of just used the same on non cup.

The cup wheel bearing is 84od x 39id x 40width in mm, and the standard 182 is 72 x 37 x 37, so the CV`s are sized to fit.
,

 

[STEVE.M]

I love this stuff.
Did you know that the spherical bearing on the lower end of a Yamaha DT125R rear shock, which is not serviced, is exactly the same as the one in a Kawasaki Z550 H2 rising rate unitrak link arm, which is.
@imprezaworks

 

[imprezaworks]

Sure did. Was just reading that exact statement earlier.

 

[Digger Davo]

The cup wheel bearing is 84od x 39id x 40width in mm, and the standard 182 is 72 x 37 x 37, so the CV`s are sized to fit.
,

Thank you. The reason I asked is that my garage replaced the driver side shaft on my 182 with Cup pack suspension, with a GKN item part number 304798 looking this up on the web it looks like a std 182 oe part number 8200352042. There is the ABS rumble when braking under 5mph but otherwise seems fine!

 

[STEVE.M]

Sure did. Was just reading that exact statement earlier.

Is that the most exciting thing to do in Budapest or are you home?

 

[imprezaworks]

I'm home. Got in at 8.30am this morning, in work at 12. Living the dream

 

[flebay]

Thank you. The reason I asked is that my garage replaced the driver side shaft on my 182 with Cup pack suspension, with a GKN item part number 304798 looking this up on the web it looks like a std 182 oe part number 8200352042. There is the ABS rumble when braking under 5mph but otherwise seems fine!

They should of played spot the difference when they fitted it?
All the old news hear
http://www.cliosport.net/threads/driveshaft-problems.424018/