What's new
By:
ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Clio 182 pro race 1.2s fitment

J

jay182bg

Car  megane 265/clio 182
Wanting some pro race 1.2 alloys on my 182 in 15" what ofset etc will I need ?


Sent from my iPhone using Tapatalk
 
Rimstock are your best bet new, they supply the Ktec racing series?

330 delivered in 40 offset. Or you can order 35 and 60.1 bore but takes 5 weeks ish.
 
Thanks guys will look into it today gues 35 and 60.1 bore a little more expensive?


Sent from my iPhone using Tapatalk
 
Same price just takes longer

Think the standard bore they supply is 73 with spigot rings to suit.

When you ring ask for Justin with regards costs
 
Any one know where I can get the bronze pro 1.2's from in 15"
 
Will 35 mean will come out a little further and won't need spacers any more?


Sent from my iPhone using Tapatalk
 
Ordering wheels today. Ideally want to have no spacers but want the wheels out a nice distance but don't rub. Arches are rolled on rear. Is et35 what I want as still seen some people saying they got 5mm spacers on front? Cheers


Sent from my iPhone using Tapatalk
 
Said justin wast about he's placed a order but taken no payment so will ring again tomoz


Sent from my iPhone using Tapatalk
 
Speedy300 said:
I bought these from Rinstock a month ago or so. £330 delivered, I spoke to Steve Cox.
Click to expand...
c6e1ff17642f8dbf958d6aadbc70a51b.jpg




Sent from my iPhone using Tapatalk
 
What's the deal with the 60.1 bore? What does it mean? Looking at getting some 1.2's at some point so it'd be interesting to find out.
 
Niall said:
What's the deal with the 60.1 bore? What does it mean? Looking at getting some 1.2's at some point so it'd be interesting to find out.
Click to expand...

60.1 is the correct bore size for the clio. Hole in the middle of the wheel. Or the hub.

Anything lower than 60.1 won't fit unless machined. Anything bigger than 60.1 will need spigot rings. Say 73.1 centre bore

73.1 spigot ring 60.1
 
imprezaworks said:
60.1 is the correct bore size for the clio. Hole in the middle of the wheel. Or the hub.

Anything lower than 60.1 won't fit unless machined. Anything bigger than 60.1 will need spigot rings. Say 73.1 centre bore

73.1 spigot ring 60.1
Click to expand...
Ah right cheers!

So are the Ktec cup spec wheels not 60.1 bore seeing as they're for 182's? Would have thought they'd be readily available.
 
Think the ones from rimstock are 73.1 and will fit fine with the correct spigot rings, you can order/specify 60.1 but will take a few weeks.
 
The ktec 182 championship ones will be 60.1mm so that they don't require spigot rings and are stamped for the series.

I'm guessing you'd need proof of being in the championship to get them at their discounted price.
 
What size bolts am I going to want to use with these with that offset?


Sent from my iPhone using Tapatalk
 
I just spoke to rimstock. They can match that price earlier in the thread.

For my 182 trophy

Is et35
7x15
60.1

Correct.

It's slightly lowered it won't rub will it?

There for the track.


Sent from my iPhone using Tapatalk
 
Got fitted today currently left spacers on tho as stud conversion goes on today sticks out a little I thing but worried when remove spacers will sit in to far


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Similar threads

B
About to get some Clio 182 alloys any advice on fitment
Replies
0
Views
453
Ben llewhellin
B
colesy
Clio 182, which direction to take?!
Replies
8
Views
729
colesy
colesy
D
New member, 2nd clio, 1st 182!
Replies
10
Views
709
PP200t
P
A
clio MK 2 d4f 728/ 784 frankenstein
Replies
2
Views
291
Avengeharley
A
bvnditi
PMS Power Steering Delete?
Replies
17
Views
1K
Filters
Filters
Back
Top