Clio 200 with Oz Ultraleggera's

[Nobafett]

Finally had my new wheels and tyres delivered today. Loving the look and stance compared to the standard 200 wheels. Very very happy. Just a few quick photos.

 

[Gus]

Love those wheels - Are they the gun metal matte ones with AD08r tyres? Got the exact same combo myself albeit for a 182. Such light wheels too.

 

[Nobafett]

Yeah, Matt black with the Yoko's.

 

[mossyv6]

Very nice how much and where from?

 

[Ash1751]

Looks mega, goes great with the colour of the car too

 

[Smiffyboy1990]

Looks ace!

Sent from my D6503 using Tapatalk

 

[Nobafett]

Thanks for your kind comments, I'm very pleased. Bought from Demontweeks, and cost a lot!!

 

[Gorms]

It's such a good combination on the 200 and they sit perfectly with no spacing required. Is your car on standard cup springs?

Here is mine on H&Rs and Ultras about 3 years ago. I think I paid close to £1500 with tyres from Demontweeks.

Just one word of advice, make sure you put some copper slip or some form or lube on the spigot rings as you will be cutting them off if you don't.

 

[OHEG80]

Really love those!

Are you running an Akra? Or did you color code the exhaust tips? If the latter, can I ask which paint is that bud?

 

[Gorms]

Really love those!

Are you running an Akra? Or did you color code the exhaust tips? If the latter, can I ask which paint is that bud?

Just carbon tips.

 

[mossyv6]

@Gorms

Maybe missed this but what's the spec on the wheels/tyres - look great.

 

[OHEG80]

Just carbon tips.

Thanks bud. Pure Motorsports?

 

[Gorms]

@Gorms

Maybe missed this but what's the spec on the wheels/tyres - look great.

The wheels from what i can remember were 8x17 Et55 5x108 and the tyres were Yokohama AD08 215/45/17 but i think they have since been superseded by the AD08R.

 

[Gorms]

Thanks bud. Pure Motorsports?

http://www.streamlinecarbon.com/v2/

 

[OHEG80]

http://www.streamlinecarbon.com/v2/

thx

 

[Nobafett]

I actually went with 225/45 as I can't stand the stretched look and 225 are a more suited fit to an 8 inch wheel I believe. And yep, they are AD08R's. Superb tyre.

 

[Nobafett]

Ive only had the car two months or so, but assume its on the standard cup springs. Nothing in the paperwork to suggest otherwise and comparing it to the H&R above, I would say so.

 

[Knuckles]

I love that but I don't know why.

I normally hate those wheels on mk3s. Are they the same ones that everyone else fits?

It can't just be the larger profile tyre making them look different/better.

It does look amazing though I bet you're chuffed.

A slight drop would make that look bang on

 

[Nobafett]

Yeah, pretty sure they are the same as everyone else. I was also thinking that it could do with being a little lower, but don't want to compromise the ride. I had Eibachs on my 182 and they were fine. What do people normally go for?

 

[Gorms]

Yeah, pretty sure they are the same as everyone else. I was also thinking that it could do with being a little lower, but don't want to compromise the ride. I had Eibachs on my 182 and they were fine. What do people normally go for?

H&Rs are you best bet, as close to standard ride quality as possible with a nice 30mm drop.

 

[220Trophy]

that looks really good, nice saving in unsprung weight too.
David

 

[mossyv6]

Yes deffo go for H & R lowering springs. As said above - perfect drop and ride not effected.

Make sure you buy the right ones though (they're is 2 types) late 200's have a smaller top mount, so check under your suspension tops under the bonnet.

 

[182_steve]

That looks really smart!!