when i start the valver from cold it starts fine but then stalls straight away as soon as the revs come back downto idle.. if i put a few revs on it really struggles to get up to about 3k and as soon as i let off it stalls again, this has only happened since i removed the vacumn pipe and connector from the map sensor. also if i dip the clutch it stalls. when the car is warm the car idles fine. got to admit if i rev it and i have my hand on the inlet mani i can feel air blowing up the intake mani (only just remembere this so havnt checked all pipes)
i tought it could be the TPS but when warm it revs fine, drives fine etc
i have replaced the coolant temp sensor, lambda sensor which sorted my kangoring when warm, plugs, leads, dizzy cap and also cleaned ICV twice
any suggestions guys
james
i tought it could be the TPS but when warm it revs fine, drives fine etc
i have replaced the coolant temp sensor, lambda sensor which sorted my kangoring when warm, plugs, leads, dizzy cap and also cleaned ICV twice
any suggestions guys
james
Last edited: