cup hubs ?

[172RR]

I take it I have measured the wrong bit but would I be right in saying these are cup hubs ?

 

[NorthloopCup]

I take it I have measured the wrong bit but would I be right in saying these are cup hubs ?

No pics or measurements mate?

 

[172RR]

this is it

 

[172RR]

Well I have some avo suspension that won't fit as in the holes are to close, it's not a cup car but I'm guessing someone has fitted cup hubs

 

[NorthloopCup]

this is it

You need to measure the centres of the bolt holes mate, but I'd hazard a guess that they're 54mm non cup packed hubs if we are talking 182's as they are 60mm centres, but they're cup hubs if we are talking 172 cup. Make sense?

 

[NorthloopCup]

Well I have some avo suspension that won't fit as in the holes are to close, it's not a cup car but I'm guessing someone has fitted cup hubs

You need 182 cup/cup packed hubs by the sounds of that then mate.

 

[172RR]

It's a 182, but the avo coilovers I have the holes are even closer together

 

[172RR]

this is the measurements I took from the avos

 

[NorthloopCup]

It's a 182, but the avo coilovers I have the holes are even closer together

You need 172 hubs then mate, or alternatively get the avo's machined to suit. You just need to get one of the holes elongated so they suit 54mm or 60mm spacing hubs.

 

[NorthloopCup]

this is the measurements I took from the avos

Are you measuring the hole centres? That's what you need to be measuring on both items.

 

[bloke]

measure as you've done then measure one hole, add that to the first measurement and that will give you your centres.

 

[172RR]

I have left it all up the unit, I don't suppose anyone has one lying around they could messuage for me

 

[bloke]

will be 54mm or 60mm.

 

[NorthloopCup]

measure as you've done then measure one hole, add that to the first measurement and that will give you your centres.

1st pic shows a measurement of 46mm. Bolt holes are 14mm, so that gives a 60mm spacing.
2nd pic shows a measurement of 40mm, so same theory applied gives hole spacing of 54mm.

 

[bloke]

1st pic shows a measurement of 46mm. Bolt holes are 14mm, so that gives a 60mm spacing.
2nd pic shows a measurement of 40mm, so same theory applied gives hole spacing of 54mm.

i'm lazy though and didn't look at the pics:wink:

 

[NorthloopCup]

i'm lazy though and didn't look at the pics:wink:

Lol!

 

[172RR]

Right so someone has fitted cup hubs to my 182

 

[172RR]

Thanks for your help guys