Dci Gearbox

[tom172cup]

Just wanted to know is it possible to fit a dci box to my cup, without lots of hassle.
I know there are a few people running them on there turbo clios

 

[bmh.01]

As long as the dci box has a speedo sensor hole in it it'll not be a problem.

 

[tom172cup]

What ones come with that then think i will need either a 80 or 100 wont i

 

[bmh.01]

The Ph2-> clio ones will probably be no good for you as they all came with abs speedos. It'll have to be out of something else I think, research required anyway.

 

[jack_kemp]

Im sure I've read of someone using a VAG gearbox somewhere?

 

[bmh.01]

I'd say not. Different bellhousing/change mech and clutch release mech on a vag box.

 

[jack_kemp]

I'm pretty certain I've read it... On one of the 'charged Clio's.

 

[tom172cup]

so how come the ABS makes it different

 

[Jaff.]

I'm pretty certain I've read it... On one of the 'charged Clio's.

i bilieve thats scoffs mk1 with f4r engine and vag gearbox, not a striaght fit, custom bellhousing afaik

tom if the speedo is run off the abs on the clios then theres no need for a drive off the gearbox that the cup uses (as the cup doesent have abs so it needs a way of transmitting speed to the clocks) so if it hasnt got a hole for the speedo drive on the box then you wont have anywhere to plug your speedo

 

[TheEvilGiraffe]

I'm pretty certain I've read it... On one of the 'charged Clio's.

The ClioTT with the 1.8 BAM in it ?

 

[tom172cup]

Jaffman i see now looks like this could prove difficult then dont suppose there is any other box that will fit, without lots of fabrication?

 

[Sash]

Just be aware all 3 dCi boxes are different...

65 - JB3 969
80 - JC5 128
100 - JR5 120

Typically Renault tbh

 

[tom172cup]

Right so all of the dci's are ABS thats the end of that then

 

[Jaff.]

Just be aware all 3 dCi boxes are different...

65 - JB3 969
80 - JC5 128
100 - JR5 120

Typically Renault tbh

what do the turbo boys generally use out of those 3 then? im building an f7 turbo so i would be looking into getting a dci box

 

[Jonny1*2]

The Ph2-> clio ones will probably be no good for you as they all came with abs speedos. It'll have to be out of something else I think, research required anyway.

You can reprogramme it to register off the abs with clip mate

 

[tom172cup]

so it is possible then?

 

[Jonny1*2]

so it is possible then?

In theory mate yeah. The gb should work either way, it's just the speedo which won't unless reprogrammed with clip

 

[jack_davey]

Yeah but don't you need the ABS computer in order to be able to do it?

 

[Jonny1*2]

Yeah but don't you need the ABS computer in order to be able to do it?

Oops, yeah just spotted you've got a cup. No abs rings/sensors so no go sorry.

 

[daddycool]

might be worth a call to agency transmissions in worcester, see what they can do with your existing box to make it stronger