Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Bit noisy, but thats just clios isnt it! The thing that makes me thing its cream crackered is the slightly poo gear change going back in to first, even when stationary.
Also makes a thump noise when it goes back into first, and when lifting off at high revs I get a knocking from the front drivers side near the top of the engine. Could that be down to these Bushes or is that more likely to be the top engine mounts?
Loosen off the top engine mount, give it a couple taps with a hammer till its as far toward the front of the car as poss then retighten, solved my knocking in 1st/2nd problem.
The top mount's already been done once! theres not much of a gap and if I grab the engine and rock it I can here a knock, but i dont think its the same one!
Will give the hammer trick a go in daylight, If I have to change them again think Ill get the ktec group N ones. Any one used these?