Hello recently brought a 182 which has devoloped a problem.
The other day I was just pulling out of a junction and the car just lost all drive. It will go in to gear but I can fully lift the clutch and nothing will happen get a slight crunchy noise. So my first thoughts where clutch which so I took this out to realise its a new Valeo clutch.
After further investigation we found the driveshaft to gearbox sleeve was worn badly so this was replaced hoping we had fixed the problem put it back together and still no drive. So after that the gearbox was replaced hoping this would solve my problem but it still hasn't the car still has no drive
So in short the car turns on revs fine no lights on dash think I can feel it go in to gear but has no drive. The original gearbox was fitted with a quaife LSD but the new box hasn't its a low mileage at 55k like for like box
Any ideas or help would be greatly appreciated as I'm running out of ideas
The other day I was just pulling out of a junction and the car just lost all drive. It will go in to gear but I can fully lift the clutch and nothing will happen get a slight crunchy noise. So my first thoughts where clutch which so I took this out to realise its a new Valeo clutch.
After further investigation we found the driveshaft to gearbox sleeve was worn badly so this was replaced hoping we had fixed the problem put it back together and still no drive. So after that the gearbox was replaced hoping this would solve my problem but it still hasn't the car still has no drive
So in short the car turns on revs fine no lights on dash think I can feel it go in to gear but has no drive. The original gearbox was fitted with a quaife LSD but the new box hasn't its a low mileage at 55k like for like box
Any ideas or help would be greatly appreciated as I'm running out of ideas