Drive shaft issue

[del 172]

Hi on my 172 I’m having trouble with o/s drive shaft.the sleeve on the end keeps sliding into the gearbox seal,then end up with a fooked seal.last time I put four spot welds on and it’s broken them all off and done it again,this is the 3rd time in about 150 mile.any ideas cheers

 

[Clio.lee]

The drive shaft must be pushing it inthen returning. Is the bearing ok on the driveshaft on the back of the block

 

[del 172]

The bearing seems fine,there doesn’t seem to be any play anywhere,thinking about welding the sleeve to the shaft all the way round

 

[Ben perry]

It should have a rubber o ring on gearbox splines to stop that happening👍

 

[del 172]

Yeah there is an o ring there but doesn’t seem to stop it happening,I’ve ordered some more seals and o rings when I put it bk together.

 

[Ben perry]

Mine was missing so I put universal one on and as it wasn’t genuine Reno one the shaft went over it genuine one is a lot more chunky