Dummies guide to removing carbon canister?

[Photomattbrown]

Need to remove the carbon canister in order to make room for brake cooling duct, anyone got a guide/tips/advice?

 

[Raceface_13]

Take it all out. Fit resistor in plug (either someone will chime in with resistor size or ill have a look tomoz if i can) buy a one way valve for return line to tank (motoX petrol tank/cap vents work well and what im using. Block off on manifold. Job done dude

 

[Aydon182]

Take it all out. Fit resistor in plug (either someone will chime in with resistor size or ill have a look tomoz if i can) buy a one way valve for return line to tank (motoX petrol tank/cap vents work well and what im using. Block off on manifold. Job done dude

Can you actually get to it and remove it without getting the front bumper off? I've had it off and on so many times now I should of just tackled this job when I changed the alternator !

 

[Photomattbrown]

Take it all out. Fit resistor in plug (either someone will chime in with resistor size or ill have a look tomoz if i can) buy a one way valve for return line to tank (motoX petrol tank/cap vents work well and what im using. Block off on manifold. Job done dude

Thanks matey, if you get chance to look at resistor size that’d be ace, also don’t suppose you know off the top of your head what mm the valve needs to be do you?

 

[donnylad]

sorry to bump an old thread, this is on my to do list. What one way valve do I need to buy though??

Thanks!

 

[Raceface_13]

sorry to bump an old thread, this is on my to do list. What one way valve do I need to buy though??

Thanks!

Have a look on e bay for the little valve that vents the fuel tank. Thats what i used, works a treat

 

[RustyMojo]

Sorry for the thread revival guid chaps, but has anyone got a list of what is needed step by step to remove the Carbon canister? Also what vents, resistors etc. to buy?

Cheers