1.6 16v clio priv
Have done some work on the airbag. I need to reset the error codes. Can you get a fault code reader for the abc and if so where from
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
Due to ongoing maintenance work some features and functions (including Dark mode!) may be unavailable or visually appear differently.
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Error codes reset
- Thread starter bigmonmulgrew
- Start date
1.6 16v clio priv
Passenger side airbag went off.
Had a new computer .
I'm changing the seats so replacing the airbag is not an option.
I have wired in a resistor as described in the guide elswere on this site, to trick the abc into thinking there is an airbag.
It is still showing a fault. I want a reader so I can find out what its still flagging up and reset it. At £68 a pop I don't wanna have renault reset it. I'm confident I've wired the resistor correctly but I dont wanna risk it.
Had a new computer .
I'm changing the seats so replacing the airbag is not an option.
I have wired in a resistor as described in the guide elswere on this site, to trick the abc into thinking there is an airbag.
It is still showing a fault. I want a reader so I can find out what its still flagging up and reset it. At £68 a pop I don't wanna have renault reset it. I'm confident I've wired the resistor correctly but I dont wanna risk it.
If you want the air bags removing from the circuit (fitting buckets etc) then the fault has to be cleared before you can remove them. If the seat airbag has gone off then it may be the rear passenger inertia real sensor that needs changing. it could be anything and you cant find out until its pluged into the clip. if your anywhere in the north go to specialist renault breakers they will plug it in for £30 ish and in the south try Mike at rentech
1.6 16v clio priv
Rear passenger enertia reel has been replaced already. I wired in the resistor so that it thinks the airbag has been replaced. The abc was replaced at a renault dealership, as was the enertia reel. I told them to leave the airbag and front passenger pt as i was going to fit a resistor inorder to remove them. When I had wired it up i expected the warning light to go out but it didnt.
Is it possible to get your hands on an error code reader and DIY it.
Is it possible to get your hands on an error code reader and DIY it.
1.6 16v clio priv
Rigth the passenger PT and side airbag fired, The Rear drivers side PT fired (even though no one was there),16v_jon said:
The ABC and Rear drivers side Pt have been replaced.
The passenger airbag and PT have not been replaced because I intended to remove them and fit bucket seats. (Which I did today)
I have fitted a resistor to make the ABC think that the passenger side airbag and PT are still there.
I don't know how they programmed it. I don't know what it involves. Would all the repairs have to be carried out prior to it being setup then?
