Exhaust tips

[Cub.]

How best do I get these back to silver (I assume they were once silver?).

Thank you

@Gally @Daniel @Scrooge

 

[Brigsy]

Silvo wadding or autosol will get them shiney again.

 

[Flat Eric]

I normally get autosol with a very soft tooth brush

Then buff off with a cloth

 

[Flat Eric]

When I say buff off.
I normally wrap cloth round exhaust and pull it side to side, like you are drying your back as such.
🤣

The cloth I use is a bloody old bar towel, god knows where it came from, it was my dad's.

 

[Scrooge]

Autosol and some time mate. Just remember to give them a wipe down with every wash and it should keep the clean for a while

 

[Gus]

Try not to get autosol or other metal polish on the plastic surrounds too.

 

[McGherkin]

To do the insides you can get foam polishing cones that go on a battery drill, saves tonnes of effort

 

[Louis]

Whatever you do it'll 100% look sus to anyone walking by.

Hth.

 

[Cub.]

I’ve made a start with the autosol….not bad. Going to need a few goes but spot the one that’s had a first pass 😂😂

 

[Daz...]

Started on the far left I see.

 

[PP200t]

Wire wool will also help and won’t damage them. I use it all the time for tips. Wire wool first then autosoll to finish.

 

[Clio_fool]

I'm surprised the butler didn't know what to use on them.

 

[Bluebeard]

I use pink stuff and a scouring pad or wire wool. 👍

 

[Sunglasses_Ron]

Has anyone ever tried Duraglit/Brasso wadding?

I was thinking about giving it a try. Duraglit used to get the chrome bumpers on my Rayleigh Budgie looking 🔥

 

[leeds2592]

I’ve had this twin kit for absolutely years now.

Think it was Jim @ White Details that recommended it going on for 10 years ago maybe. Last forever.

Britemax Metal Twins Kit - Medium

Britemax Metal Twins Kit - Medium The Britemax Metal Twins Kit comprises of two Britemax Metal Polishes, Easy Cut and Final Shine. They are also listed below in greater detail. Easy Cut is the heavier of the two polishes and will clean light to heavy oxidation easily from bare metals such as...

www.shopnshine.co.uk

 

[Brigsy]

Has anyone ever tried Duraglit/Brasso wadding?

I was thinking about giving it a try. Duraglit used to get the chrome bumpers on my Rayleigh Budgie looking 🔥

Works class, same with silvo wadding. I use it on all alloy and stainless parts.

 

[Cub.]

Did three of them, but then had to go out so I’ll finish the last one tomorrow. Some in progress photos;

Happy with that tbh.

 

[McGherkin]

Simply loveleh. Nice work Paddington.

 

[Bluebeard]

Your love for this car is so evident. Amazing. 👏🏻👏🏻

 

[ilovewilly]

The cloth I use is a bloody old bar towel, god knows where it came from

A bar? 🧙‍♀️

 

[Krarl]

 

[Gally]

Good job bear feet. One of the best tips I got was these from Tesco...

They can be about messy but some water and the autosol they are tremendous. So cheap compared with wire wool imo and the soap seems to help the metal polish go a bit longer. You've done a fine job though, just incase anyone else sees this post.

 

[AshyC GT]

I have used newspaper and autosol previously to polish them up.

This was a tip I learnt from my grandad who used to clean his brass up with newspaper and brasso

 

[frayz]

If you’ve got any spare ceramic coating for wheels, it’s works wonders on exhaust tips for keeping them clean as the carbon deposits no longer stick.

 

[MarkCup]

The foot's slightly disturbing. Otherwise, great job 👍

 

[Cub.]

The foot's slightly disturbing. Otherwise, great job 👍

Paw, Mark.

Paw. Not foot.

 

[Louis]

Did three of them, but then had to go out so I’ll finish the last one tomorrow. Some in progress photos;

View attachment 1598148

View attachment 1598149
View attachment 1598150View attachment 1598151

Happy with that tbh.

Sus

 

[Cub.]

Finished it up this morning.

 

[Not a Diesel!!!]

Nice. Were practically invisible before.

You could set up a business for Golf R owners.