Fitting aftermarket wheel

[ForceIndia]

Sorting a new wheel, just wanted to check these are the parts I need.
Wheel
Boss adapter
Airbag resistor

Nothing I'm missing is there?

 

[Fagan]

trying to fit my aftermarket wheel right this minute.

Do I remove the airbag wiring and the plastic wheel altogether? The hole in the boss kit for the wiring is tiny and the connections would never fit through.

 

[elmo2002]

if its the right boss kit they do. Just

 

[Fagan]

I'll show you what I mean..

The airbag connections wont go through the hole thats there.

Is it possible to just remove the airbag connections and the plastic ring there attatched to?

 

[elmo2002]

no dont do that, mine snapped and all came out in a big mess and had to go to the main stealers and spend just over 100 on a new cassette. Are you sure that is the right boss for the car as it looks nothing like mine did.

 

[Fagan]

Well I suppose it's possible that it's the wrong boss but I bought it from here..

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=360113870945

Where did you get yours?

 

[elmo2002]

mines a momo boss. All i can suggest is to drill a hole next to the one you have and open it up slightly. i had a cut out in my boss bigenough for the 2 air bag plugs and the grey horn connector to go through.

I'll see if i can grab a pic

 

[ForceIndia]

Does anyone have a reply for my original question?

 

[Gaz_]

Its correct Horn off the stalk on a phase 1 iirc?

 

[elmo2002]

you can just about see the hole in this pic although it is crap sorry

 

[elmo2002]

Does anyone have a reply for my original question?

ph1 or ph2? as you may need 2 airbag resistors?

 

[Gaz_]

Some info i posted in here whan i did mine
http://www.cliosport.net/forum/showthread.php?t=217556&highlight=momo+race

 

[ForceIndia]

Some info i posted in here whan i did mine
http://www.cliosport.net/forum/showthread.php?t=217556&highlight=momo+race

Thanks fella. Mines a ph1, only one resistor req'd/

 

[mark989]

i had to file my boss to get the connector through.