Fitting Induction Kit to 1.2 16v

[chris_Mk2]

Hey, was gonna fit an induction kit, just for the noice , but i can figure out where the hell to fix it on lol. I've got one of the later 1.2's the ones that look like a plastic block. any help would be great thanks.

 

[Android]

Take the plastic cover off. Theres a connection for it on the right Need a relocation pipe though

maybe.. a dunno.

 

[chris_Mk2]

thats great cheers

 

[nick.]

is it like that ^
From memory just disconnect air feed that run in front of your battery to towards the passenger head lights.
Then disconnect breather pipe.
Take off the plastic cover/airbox cann't remember how it is fixed think it was 4 bolts.
Then mount induction kit and 90 degree bend with a breather pipe filter, and I used one cable tie so the breather pipe and filter stayed still
Hope that helps

 

[chris_Mk2]

is it like that ^
From memory just disconnect air feed that run in front of your battery to towards the passenger head lights.
Then disconnect breather pipe.
Take off the plastic cover/airbox cann't remember how it is fixed think it was 4 bolts.
Then mount induction kit and 90 degree bend with a breather pipe filter, and I used one cable tie so the breather pipe and filter stayed still
Hope that helps

Thats the one thats great
cheers

 

[EddDurrant]

any idea how to fit for a Mark 2 phase 2? Everyones goes into the throttle body
In exact same place on Mark 1 and most cars but everyones saying I need an adaptor?

 

[tonksy93]

what size is the oil breather pipe?

 

[wujek240287]

what size is the oil breather pipe?

its not too big filter for that small engine? i found k&n induction kit dedicated for clio 1.2 16v 75hp, its 57i series model 57-0412