Fuel flap rubber grommets

[DomP182]

Mine are missing and its irritating me, I know Renault dont do them separately but has anyone found a suitable equivalent?

 

[YorkshireKyle]

Get some from a breaker car, I doubt anyone would be asking for them bits haha

 

[green]

Replying as I need some as well.

 

[Coops Mk1]

Don't think there's any car with them left, lol

 

[GazTwo]

I've not tried it but on some 9V (square) batteries you get a small cap over the positive terminal, these seem an ideal size for the job.

 

[DomP182]

Possibly an Ebay box of assorted grommets from China?

 

[DomP182]

Tried finding something similar on the bay but no luck, finding the correct search term is the problem as I'm sure there would be something

 

[OssPoop]

I've tried finding something too. I got some rubber feet for a drone but they were too big, I'm sure there's some that would fit, it's just finding them!

 

[clio_ross]

I bought a set of the sticky dots mentioned in this thread and they seem to have done the trick;

Trophy #185's story

Only way to have a track car ;-) Liking the brake upgrade mate. I'm at the stage where I need to refurb my calipers, so its now a toss up between Brembo upgrade or standard refurb??? The only thing that's stopping me is that the standard calipers with the RC6 or RC8 pads are unbelievable...

www.cliosport.net

 

[Coops Mk1]

I bought a set of the sticky dots mentioned in this thread and they seem to have done the trick;

Trophy #185's story

Only way to have a track car ;-) Liking the brake upgrade mate. I'm at the stage where I need to refurb my calipers, so its now a toss up between Brembo upgrade or standard refurb??? The only thing that's stopping me is that the standard calipers with the RC6 or RC8 pads are unbelievable...

www.cliosport.net

which exact ones? i can only find 8x2mm or 10x4mm?

 

[green]

Yep me too... I’ve got the 10 x 4mm ones on there way to me and I’ll re- post once I’ve tried to fit them.

 

[clio_ross]

@Coops Mk1 @green

I’ve lost the sheet of the sticky dots I bought and just checked and eBay listing I used is no longer active, so I’ve been out with my verniers and measured the ones on my car and they are the 10mm x 4mm ones.

 

[Coops Mk1]

cheers lads I'll go with them

 

[DomP182]

Glad I'm not the only one that's irritated by these being missing, in fairness it's the least of my cars worries

 

[M90SR]

@DomP182 these work and look fab

https://www.ebay.co.uk/itm/10Pcs-He...var=513018424284&_trksid=p2057872.m2749.l2649

Drill the filler neck out to 6mm & these 8mm allen bolt covers are perfect.

 

[frayz]

Found this on my Cayman. Pretty sure they would fit the Clio too.

 

[YorkshireKyle]

Found this on my Cayman. Pretty sure they would fit the Clio too.

View attachment 1449374

It'd be the most expensive thing on the Clio

 

[frayz]

It'd be the most expensive thing on the Clio

You’ll be surprised.
Porsche parts have often surprised me with how reasonably priced a lot of stuff is.

 

[YorkshireKyle]

You’ll be surprised.
Porsche parts have often surprised me with how reasonably priced a lot of stuff is.

The Macan brake deflectors still arent cheap, been wanting some for ages but I'm not paying £60 a side for a bit of plastic that directs a bit of air

 

[frayz]

The Macan brake deflectors still arent cheap, been wanting some for ages but I'm not paying £60 a side for a bit of plastic that directs a bit of air

GT3 brake ducts are £11

 

[YorkshireKyle]

GT3 brake ducts are £11

Now you're just making me spend money

 

[Martin.]

GT3 brake ducts are £11

TAKE MY MONEY

 

[frayz]

Sorry boys i totally lied about the GT3 ducts being as cheap as £11 a side Ha!!!

 

[frayz]

Okay okay, enough dicking about.
A quick scout online has lead me to these. I guess i need to have a measure up

Push In Rubber Feet | Small Rubber Feet | Grommet Feet

Push In Rubber Feet - To fit 3.2mm to 12.5mm Hole Diameter. An easy fit base for supporting small furniture, appliances, and industrial equipment.

www.vital-parts.co.uk

or im pretty sure we could get a job lot here

Push-In Feet | Grommet & Bumper Feet | UK Stock

Push-In Feet (Grommet, Mushroom, Bumper) in PVC or TPE for low-profile, insulated support. Easy-fit design—ideal for lab & desktop equipment.

www.sinclair-rush.co.uk

 

[M90SR]

Okay okay, enough dicking about.
A quick scout online has lead me to these. I guess i need to have a measure up

Push In Rubber Feet | Small Rubber Feet | Grommet Feet

Push In Rubber Feet - To fit 3.2mm to 12.5mm Hole Diameter. An easy fit base for supporting small furniture, appliances, and industrial equipment.

www.vital-parts.co.uk

or im pretty sure we could get a job lot here

Push-In Feet | Grommet & Bumper Feet | UK Stock

Push-In Feet (Grommet, Mushroom, Bumper) in PVC or TPE for low-profile, insulated support. Easy-fit design—ideal for lab & desktop equipment.

www.sinclair-rush.co.uk

Or just buy a pack of 10 of these from Ebay for £2.15...
https://www.ebay.co.uk/itm/10Pcs-Hex-Socket-Allen-Bolt-Screw-Nut-Hexagon-Head-Cover-Cap-Protector-M4-M24-M/323975904450?ssPageName=STRK:MEBIDX:IT&var=513018424284&_trksid=p2057872.m2749.l2649

 

[M90SR]

 

[Stevej172]

@M90SR did you say that you have to drill the holes to make them fit?

 

[M90SR]

@M90SR did you say that you have to drill the holes to make them fit?

Yes Steve you have to increase the opening to 6mm. So easy to do, took me seconds.