clio_ross
ClioSport Club Member
Clio 172
Evening all,
I’m in need of CS guru’s help to try and track down what it making a near constantly rattle from my GAZ Gold rear coilovers that’s appeared after a fitting full set to my 172.
Bit of background; These coilovers were bought new by me with 400lb front & 300lb rear spring rates and fitted 5/6 weeks ago. Car is only a weekend toy that goes out on dry days with the occasional track day (being saying that for 6 years and still not got there). Rear axle bushes were replaced last year and car runs a whiteline rear ARB.
I had the GAZ’s on the car for about 60 miles!(my first run out after fitting them) and there was a near constant rattle from the rear, that didn’t get much better the harder the dampers were set. This noise wasn’t there before fitting them (was on new cup shocks & Eibach sportlines for 4 years prior and approx 2k miles), so the only thing that’s changed is the fitting of these new coilovers.
Spoke with GAZ (who were really good tbf to them) and returned the units to them to have them inspected. They replaced the seals & spherical bearing in the NSR coilover, put both units on the dyno and both units were proved good.
Got them back and fitted them again, this time with Powerflex upper bushes, as I’m not a fan of the bushes GAZ supply (they have no sleeve/bush to stop you over-compressing them). I’ve also removed my rear k-brace, to ensure this wasn’t amplifying a small noise, but the noise is still there and noticeable
Attached is a video filmed from above the NSR damper which shows the noise:-
On my standard CS perusal for anyone with similar issue, I seen that Mark (@Jekyll) had issue with a set of GAZs he had previously, that was down to valving, but GAZ have assured me mines are good.
So over to CS for any help/experience anyone can provide that would help me resolve this…..sort of throwing them in the sea.
As always, thanks in advance for any help.
I’m in need of CS guru’s help to try and track down what it making a near constantly rattle from my GAZ Gold rear coilovers that’s appeared after a fitting full set to my 172.
Bit of background; These coilovers were bought new by me with 400lb front & 300lb rear spring rates and fitted 5/6 weeks ago. Car is only a weekend toy that goes out on dry days with the occasional track day (being saying that for 6 years and still not got there). Rear axle bushes were replaced last year and car runs a whiteline rear ARB.
I had the GAZ’s on the car for about 60 miles!(my first run out after fitting them) and there was a near constant rattle from the rear, that didn’t get much better the harder the dampers were set. This noise wasn’t there before fitting them (was on new cup shocks & Eibach sportlines for 4 years prior and approx 2k miles), so the only thing that’s changed is the fitting of these new coilovers.
Spoke with GAZ (who were really good tbf to them) and returned the units to them to have them inspected. They replaced the seals & spherical bearing in the NSR coilover, put both units on the dyno and both units were proved good.
Got them back and fitted them again, this time with Powerflex upper bushes, as I’m not a fan of the bushes GAZ supply (they have no sleeve/bush to stop you over-compressing them). I’ve also removed my rear k-brace, to ensure this wasn’t amplifying a small noise, but the noise is still there and noticeable
Attached is a video filmed from above the NSR damper which shows the noise:-
On my standard CS perusal for anyone with similar issue, I seen that Mark (@Jekyll) had issue with a set of GAZs he had previously, that was down to valving, but GAZ have assured me mines are good.
So over to CS for any help/experience anyone can provide that would help me resolve this…..sort of throwing them in the sea.
As always, thanks in advance for any help.