Getting my camber shims fitted today

[SEAN16V]

I am getting my camber shims fitted today by a garage does anyone have any hints or anything or Instructions 2 fit them because they have never fitted them before I found this abit weird thanks

 

[welshname]

I'm assuming you mean on the rear...

http://i42.photobucket.com/albums/e320/pikeypiles69/IMG_4736.jpg

If they are a garage they will be able to do it easily. They just take apart the hub on the rear, and place them there and then put everything back on.

Simples.

 

[Tony Hunter]

They are marked,but you should be able to see which is the thick bit,this should have a + on it.

I wouldn't really have taken it to somewhere that has not done them before.

But it's no surprise that they haven't,it's not an everyday job is it.

 

[Kieran..]

easy job with the right tools to get all the bolts undone

 

[skydiver]

easy job with the right tools to get all the bolts undone

+1

 

[SEAN16V]

Cheers guys

 

[SEAN16V]

The shims don't fit because they don't have a hole in the middle just a flat plate there are from Pure motorsport they don't fit my 1.2 Clio so what are my other options guys

 

[welshname]

Just put some washers on the bottom 2 bolts iirc.

 

[SEAN16V]

Yeh but what size washer ?

 

[Matt e]

drill a hole in the middle?

 

[SEAN16V]

what a massive hole like ktech shims i am thinking of buying ktec plastic shims now

 

[Tony Hunter]

Do not use washers,they corrode and crumble.

 

[olliemilsom]

i used sheet metal to make a shim that goes on the bottom two bolts, seems to be good so far

 

[Tony Hunter]

Ok,whatever.

 

[stephen chadwick]

if your handy with tools its pretty easy to do. i would just drill out the centers of the ones you have bought

 

[Cupman29]

You using the car on track?