help/advice needed

[jamievt]

on a recent track day shall we say an incident resulted in a pad slipping loose of the caliper and jamming between caliper and disk causing it to spray little speckles of metal down the side of my car which are now stuck in the paint what will be the best way to remove these?

thanks

 

[-J-]

Try giving it a going over with some Ironx, then use a claybar with some lube. Should help remove some of the fall out.

 

[Cliotoby]

As said, buy some Iron X, spray it on, leave to dwell then rinse off. Repeat if necessary.

 

[jamievt]

ive already gave it a go over with jet wash basically point blank with no success but thing because the metal was red hot its hit the body burnt into the paint and cooled instantly?

 

[jamievt]

which of these 3 do i need or they all the same?

http://www.ebay.co.uk/itm/IronX-Iro...ssories_Car_Care_Cleaning&hash=item2a21661b33

http://www.ebay.co.uk/itm/CarPro-Ir...ssories_Car_Care_Cleaning&hash=item1e6deb1e7b

http://www.ebay.co.uk/itm/IronX-Che...ssories_Car_Care_Cleaning&hash=item3ccb1b008e

 

[Cliotoby]

http://www.ebay.co.uk/itm/CarPro-Ir...ssories_Car_Care_Cleaning&hash=item1e6deb1e7b

I wore my brakes down to the point where it fell out the caliper and had the same problem.

There are alternatives like Wolfs Deironizer or whatever its called now, but Iron X is the best.

 

[jamievt]

thats similar to mine thought the specks have began to rust many thanks ill go to few local places 1st before i get it of the bay

 

[Cliotoby]

You wont find it in shops mate. Ebay, or try Clean Your Car, i4 Detailing, Elite car Care online shops all sell it.

So that link you posted earlier.

http://www.ebay.co.uk/itm/IronX-Che...ssories_Car_Care_Cleaning&hash=item3ccb1b008e

 

[Dan@M.A.D]

No point pressure washing at point blank range as it will just drive the particles further in to the clear coat.

Best bet is Iron x as previously mentioned. It works wonders!

 

[jamievt]

ok thanks everyone for the help