Help please, heater blower doesn't work at all

[cliodriver17]

My heater blower on my 182FF doesn't blow out anything on any of the settings at all. The lights on the display light up but nothing comes out.

Can anyone help or direct me to a thread with a solution?

Haven't tried fixing it yet as I'm unsure of where to start.

Any guidance would be greatly appreciated [emoji4]

 

[cliodriver17]

Can anyone help? Checked all the fuses today but all were fine.

 

[benkay]

Search resistor pack. There's a guide I wrote on how to fix. Most likely this.

 

[cliodriver17]

Search resistor pack. There's a guide I wrote on how to fix. Most likely this.

Thanks for your reply, Will have a look later on

 

[VR46-G@Z]

I've just fixed mine, If you remove the scuttle panel on drivers side(easy to do) then unplug the connector to the resistor pack and stick a piece of electrical wire in the two end ports on the connector (1 and 5) to complete the circuit, you may then have the blowers on full blast, if so this tells you the resistor is defunked... If this is the case you can get a resistor for £25 delivered on Ebay with a 12 month warranty.. It's a simple 2 screw removal so if your'e not mechanically minded it really is a doddle! :up: