ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Help **Please Look Inside**



  Fiesta ST-3
For the last couple of months ive been putting a clio 172 engine in my Coupe, but i have faced a few snags recently. So please help. I have two problems..

Problem 1

I have fitted the alternator, power steering pump and air con but there is a bracket that sits on top of all of these. Anyone know what is called? Or if it has a specific bracket name?

Problem 2

The spring loaded tensioner is held on by a special bolt which i dont have, any idea where to get one?

And finally the loom from the dash comes down into the engine bay via the passenger wheel arch. What i need to know is if there is a plug up in the passeneger side wheel arch area?


Scott
 
  340i
It would be alot easier for you ditching the aircon and using a cup alternator set up..

Or Volvo 480 turbo iirc
 
  Fiesta ST-3
Well i have the whole belt setup now, just need the correct bolt for the tensioner and the top bracket to hold the alt upright. Its just difficult to find tbh.
 
  Megane dci 130
Theres a bracket that the alternator is bolted too and this is also bolted to the upper cambelt cover and through the lower inlet into the head. Then theres another bracket going from the alternator to the block.

I would just go to renault for the bolt and the bracket if its not very expensive.
 


Top