Help!!! Whiteline fitting

[stokedkid]

Help im struggling installing my whiteline. It's all assembled but was a nightmare to get the bar under load in order to fit to the end links. Finally threaded the bolt through and caught the nut, but now when I'm trying to slowly tighten everything, the bar doesn't pull itself into shape, it's as if the bar is too long. Can anyone see any obvious where I've gone wrong? Thanks!

can't get this to straighten up

Thanks!


---
I am here: http://maps.google.com/maps?ll=51.661630,-3.930011

 

[Fred@BTM]

looks like the wrong bar to me

 

[JackJack]

looks like the wrong bar to me

+1 clios only have two adjustment holes afaik.

 

[Wazza182]

its not the greatest photo in the world but it gives you an idea, there was a helpful guide on the forum but its disappeared

my beam has 2 holes but earlier models had three.

 

[Cupman29]

Did you get it from the group buy or somewhere else?

 

[stokedkid]

Thanks Fred, I was thinking that! Could probably fit it on the hardest setting but defeats the object


---
I am here: http://maps.google.com/maps?ll=51.661648,-3.930006

 

[JackJack]

Did you get it from the group buy or somewhere else?

He was part of the group buy iirc. Quite worrying considering mines in the post and should be here on monday.

 

[stokedkid]

Was purchased through the group buy, only now getting round to fitting it as doing pembrey tomorrow. Lastminute.com!!

So clio ones only have 2 adjustments?


---
I am here: http://maps.google.com/maps?ll=51.661320,-3.930266

 

[JackJack]

Was purchased through the group buy, only now getting round to fitting it as doing pembrey tomorrow. Lastminute.com!!

So clio ones only have 2 adjustments?


---
I am here: http://maps.google.com/maps?ll=51.661320,-3.930266

Yep or they always used to might of been re designed but i doubt it.

 

[TheEvilGiraffe]

Whiteline website suggests 2 holes.

http://www.whiteline.com.au/product_detail.php?part_number=BRR10Z

 

[jenic]

They fucked up last year swell, made a load of bars the wrong size or labelled them up wrong or something.

 

[stokedkid]

Hey, thanks all, guess I'll ring demon tweaks on Monday morning.


---
I am here: http://maps.google.com/maps?ll=51.661643,-3.929562

 

[JackJack]

They f**ked up last year swell, made a load of bars the wrong size or labelled them up wrong or something.

F**ked up the first half of this group buy too sent some out without bushes iirc.

 

[Soot1e]

Looking at the Whiteline website photo with 2 holes, I would say just use the middle holes which seems to be in line with the droplink. The 3rd. hole was probably provided for another car application.

 

[sprintcup]

Just measured my ARB and it's 956mm from outside to outside, is it the same on both sides? the angle measures 50x35mm, mine was from the Gb and only has 2 holes.

Regards Russ.......

 

[stokedkid]

Just measured my ARB and it's 956mm from outside to outside, is it the same on both sides? the angle measures 50x35mm, mine was from the Gb and only has 2 holes.

Regards Russ.......

Thanks Russ, I'll take a look at mine tomoro and measure the distances.


---
I am here: http://maps.google.com/maps?ll=51.454213,-3.176615