i.c.e. recommendations

[TomBear]

im currently looking to up the i.c.e. system i have in my clio right now

i have a pioneer deh 2000mp headunit already and i was looking for 6x9's, subs, amps etc etc

any recommendations?

 

[AlexG]

3 channel amp. components. 12inch sub in a ported box. 4awg wiring.

 

[MT AUDIO]

and close thread

 

[Dan R]

3 channel amp. components. 12inch sub in a ported box. 4awg wiring.

ported box?? dear oh dear.

 

[Skinny]

ported box?? dear oh dear.

Whats wrong with that.


But year. Components, 3 or 4 channel amp and sub. Should be okayish on stock battery depending on amp power...

 

[agithegreat]

ported box?? dear oh dear.

Oh dear SQ fairies have overtaken CS!
6th order quasi-isobaric series tuned bandpass FTW! Wimps with sealed systems!

 

[Struggler]

ported box only works if you use the correct box size,
those fusion boxes with a hole in the side dont work properly,

6x9s are best avoided,

basically you need to know what your after, and what your budget is,

JBL offer some good products at tastey prices,
and you need to decide if you want one or two subs,

front components are always good,
rear speakers are optional,
and if you want them run off a separate amplifier,

 

[agithegreat]

ported box only works if you use the correct box size,
those fusion boxes with a hole in the side dont work properly,

Tindeed, thats why design software should be used, such as BBp6 for best results. But PORTED BOXES DO WORK! And are a big gain in SPL output to that of a sealed box. FACT!
And fusion make some good boxes tbh....

 

[Struggler]

ive got a 4.5cuft ported box tuned to 45hz sitting in the attic that agrees with you

 

[agithegreat]

2 x 12's? Big for a 45hz box? Or before displacments?
i only run 4 cu inc dispacements at 24hz

Back on topic just buy some generic stuff from halfrauds! Will be k, unless you know what you want get anything

 

[Struggler]

thats before displacement,
houses 1 15,
it wont fit in the boot,
used to use it with mr RE XXX 15",
did make some thump

 

[Tigger]

Front components
Upgrade wiring
Dynamat the doors
Standard rears or upgrade to a decent set of coaxils if you're fussy (run off the HU)
Sub & amp
Amp the components

Drive & listen