ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

INJECTION FAULT

Car  182 Clio
Hi iv got a 56 reg clio 1.5dci (106) 6 speed bout 81000

I was driving it this morning and had injection fault come up on the dash as well as the stop light it happened at bout 50mph!

any help would be appreciated thanks!

IMG00340-20130114-0951_zps54eae363.webp
 
No simple answer I'm afraid and it needs proper diagnostics.

Could be something simple or something sinister in afraid.

Mick
 
I actually had the same on mine this morning. It came on, the car lossed all power and then it just went off itself and it was back to normal.
Are you on red?
Can anyone suggest a really good injector cleaner?
 
I also had one this morning with the generic message "Injection Fault'... now needs x4 new injectors.

As before, really needs diagnostics to say exactly what is causing it.
 
I put some redex in today to see if it helps. The message comes and goes every few months :S
 
I put some redex in today to see if it helps. The message comes and goes every few months :S

redex doesnt do anything. Your car runs a high pressure pump, a common rail with a pressure sensor in, & 4 injectors... first thing is read error codes with diagnostics, then do a leak back test on the injectors to see which one is causing the common rail pressure to drop.
 
hey guy thanks for the replys,iv tried disconnecting the batter for 40 mins,then tried the car today feels ok and the fault never came back on the dash but seems abit flat on the power! :(
 
Mate, you should be able to read injection fault codes and get enough live data from the Generic OBD2 code readers that are very cheap. I would suggest you get the vehicle checked, have you noticed any excess smoke on start up or under wide open throttle?
 
Mate, you should be able to read injection fault codes and get enough live data from the Generic OBD2 code readers that are very cheap. I would suggest you get the vehicle checked, have you noticed any excess smoke on start up or under wide open throttle?
<br>
<br>
I there, I have the same issue with the "injection fault" but just noticed that you mentioned excess smoke on start up &amp; under wide open throttle in your comment. I have both and just wondered where you were going with that?<br>
Many thanks for your help.<br><br>
 
Hi, i am having the same issue as above, I did diagnostics and came with fault code P0638,P212043 and P0202246. I changed the throttle body and pedal. still the same issue. I also changed the injectors 4 of them, reset and yet it keep saying the same. i am not sure if I have to change the fuel pump in the thank?? Any advice is much appreciated
 
Scan it with can clip to save guessing, it gives proper df codes compared to the generic readers.
 
Back
Top