ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Inlet manifold - South Wales
- Thread starter osbid172
- Start date
I do porting and polishing, im in somerset though.
HyperAlloy Combat Chassis
Interesting...I could well be interested in this. So you would send me a pre modded part, I would fit it, and send you my "old" one? How much would this skin me? I would assume from a warranty/insurance point of view it's a non-issue as nobody would be able to tell (and you aren't fitting non standard parts anyway)?
i'd say the difference would be within the operating limits of the managment system, although personally i would do this sort of mod in conjunction with other mods e.g. headwork and cams, in which case you would need a remap.
osbid172:
my business, Advanced Powertrain Developments is based in Swansea (Ystradgynlais). I can fit a modified manifold if Ben were to supply one. I can even modify yours, but Ben has them off the shelf....
osbid172:
my business, Advanced Powertrain Developments is based in Swansea (Ystradgynlais). I can fit a modified manifold if Ben were to supply one. I can even modify yours, but Ben has them off the shelf....
This, IMO is the single best gaining mod you can make to a stock type car.
Ideally you want a remap as this can eseentially add 30-40% extra ontop of the initial gain, aswell as being safer.
If you plan on not having any remap, then modification of the lower half of the manifold is my preference.
Ideally you want a remap as this can eseentially add 30-40% extra ontop of the initial gain, aswell as being safer.
If you plan on not having any remap, then modification of the lower half of the manifold is my preference.
im very interested, but whats the cost of a remap? the cheapest route to start with, i can get kent cams thro work for £90 each + VAT, was considering this as its supposed to add 16bhp according to their tech dept.
I cant afford everyhing in one thats why id like to start with one of these manifiolds, any advise BenR??
I cant afford everyhing in one thats why id like to start with one of these manifiolds, any advise BenR??
Dont bother with kents, fot £90 they will be regrinds unless they are feeling extroadinarily generous. Reginds are horrible for our cars, tap to buggery and generate some rather nasty harmonics and snap acceleration rates (of the valve, not car), and it certainly wont be 16bhp gain.
LIke i said, the manifold is the single best mod you can make to a standard type car. If you cant afford a remap, have just the lower part of the manifold modified, then have the upper aprt done when you can afford a remap.
LIke i said, the manifold is the single best mod you can make to a standard type car. If you cant afford a remap, have just the lower part of the manifold modified, then have the upper aprt done when you can afford a remap.
Similar threads
