ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Jekyll
ClioSport Club Member
OZ F1's (15x7 - ET43) with 20mm fronts and 10mm rears on BC Coilovers
Cup Turini's (16x7 - ET38) with 5mm all round on Cooksport springs
2118's (15x7 - ET43) with 5mm all round on Vmaxx Coilovers
Cup Turini's (16x7 - ET38) with 5mm all round on Cooksport springs
2118's (15x7 - ET43) with 5mm all round on Vmaxx Coilovers
Looks lovely this2118's on Bilsteins with 15mm front and 10mm rear.
Rear seats out?
25mm H and R's, with car running sportlines and Turini's.
182, SQ7, Trafic
You'll be fine on the front, if that's the same for the rear you've got no chance!
What's best/most for the rears ?
Jekyll
ClioSport Club Member
Depends on your offset. At most it'll be 15mm.
Jekyll
ClioSport Club Member
What turinis have you got?
Trophy and speedline ones have et43, cup ones have et38 so the latter are 5mm wider.
Trophy and speedline ones have et43, cup ones have et38 so the latter are 5mm wider.
Jekyll
ClioSport Club Member
Haha, knowsit!
Rubicon_
ClioSport Club Member
Defender 110
Yeah mate nothing in the back.
Sweet cheers mate only asked because ive got B14's on the way and was a bit concerned it would be a bit high at the back as i have no seats either but judging by yours it sits spot on
Rubicon_
ClioSport Club Member
Defender 110
Yeah it sits fine mate, i was the same when i first got them but really happy with the height.
Heres a better picture of the full height, obviously 15's too.
Perfect height tbh. If the back sits to low it ruins the handling. Cant wait to get them on i can imagine there a huge improvement over my V-MaxxYeah it sits fine mate, i was the same when i first got them but really happy with the height.
Heres a better picture of the full height:
Is there really much difference between 15mm and 16mm for the rears ? The 15's are almost double in price to the 16's
Jekyll
ClioSport Club Member
I'd like to point out that I was on about hub spacers and not wheel spacers.
I have 25mm and front with 16" TD et43. Sits peferct imo.
well I did have until I some how cross threaded a bolt on the spacers
10mm rear stub axle spacers to go on when I get a chance
well I did have until I some how cross threaded a bolt on the spacers
10mm rear stub axle spacers to go on when I get a chance
182, SQ7, Trafic
Me too, I wouldn't use anything but on the rears, safest way of doing it.
Clio 220 PH2
Where did you get your spacers from matey ? also what size are your wheel stud as that is the sort of size i want to have with mine.2118's on Bilsteins with 15mm front and 10mm rear.
No problems with rubbing on the wheel arch or damper ?
Many Thanks
Ben
Rubicon_
ClioSport Club Member
Defender 110
I think I got the fronts from Jcc rally mate and the tears were from pms. The studs are also pms, the longest type iirc.
I did have Dan@MAD spacers for the front but I don't like the idea of bolting a wheel to a spacer and then spacer to hub hence going for the long studs.
Yeah 10mm on the rear bud.
Clio 220 PH2
Thank you very much i will get a few bits ordered
. The top of my front tyres are very close to my coil-overs so i do need to space them out. Have you used wheel spacers on the front or again hub spacers ?Many thanks
Ben
