MK4 k9k flywheel locking.

[botfch]

First question anyone got the workshop manuals for the 1.5?

Preempting a tight pulley bolt does the flywheel have an access panel for the Renault locking tool or is it a starter motor off job?

 

[Krarl]

If it's a front starter block there's a small torx bolt plug to take out and then you can stick a 6.5mm drill bit in the crank iirc

Just be careful because sometimes it feels like it's locked but you can miss the peg slot by a few mm and you can end up shearing the pin or gouging into the crank