ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Morettes,need help connecting wires!
- Thread starter Smokey
- Start date
clio 20v
according to mr haynes wiring diagrams its the white wire for the main beams
adi
clio 20v
yeh its the white one with green stripe that is the wire for the main beam u just wanna splice into that i assume
dont have em and never fitted em so couldnt really say u not get any destructions with em
adi
Errr when I get my Clio back Ill have a look. I remember the instructions werent very clear on that point. But basically you want to splice a wire in so that when you switch your main beams on it triggers the inner pair of lamps AS WELL AS the outer normal lamps switching to main beam.
clio 20v
just thort on, the max power clio haynes manual has a section on fitting morettes if i remeber rightly, shud hav one at halfords
ill try an find the one i bought see if i can tell u a bit more info on fitting
adi
clio 20v
right according to the haynes book the original lamp plug should go straight on the quads an there should be 2 spade connectors that go into the sidelight wiring plug
the white wire with green stripe goes to the yellow wire on the quads
the grey wire is an earth and needs earthing, there should be a wire with inline fuse that goes straight to the battery
its not rocket science hehe
