Need advise asap!

[Šįk]

If I have Standard 182 wheels spaces out 25mm each corner (making wheels flush with arch) and sitting on eibech prolines, will
my wheels hit the arches during driving? For example over speed bumps, pot holes, rough roads et etc...?

The gap from the wheel to the flange under the arch is 15mm.


Any1 here had this set up with 25mm spacers each corner!? Have you experianced problems?

Please help as I am holding up seller valuable time.

Cheers, PSJ.

 

[Jat_172cup]

How much do they prolines lower it by?

 

[Šįk]

10-15mm if that.

Please help guys, as car is LY I can't afford to f**k the arches lol but been waiting ages for a set of good spacers to come along...

PSJ.

 

[mat-nos]

205/45 or 195/45 tyres??

 

[Plummer]

Go over a bump and find out?
Or use a rule and see how much space there is?

 

[Šįk]

Lol yea but what gap size is the limit!?

Tyres are just the standard size.. 205's

sorry Mat

 

[Tony Hunter]

25mm spacers WTF.

 

[mat-nos]

i think your going to struggle, most people go for 15mm tbh.
let me know via pm.......

 

[maupineda]

I have 14.5mm spacer and my wheels are 15" Turinis with 48.5 offset. So my Final offset is 34mm and they don't rub. I used to have 16" superturismos with 35 offset and 205/45 tires and they rubbed under hard bouncing.

As far as I know the ET on 182 wheels is 45, with 25mm spacers you will be at 20ET, that is way toooo much!!!! will definitely fcuk your arch liners. And remeber that 182 have 5mm wider tracks at the front.

You will be save at 10mm spacing per side but don't know if you will find hubcentric ones in this size.

Just put 5mm flat ones, you may think is too little but will be more than enough

 

[Šįk]

Ok cheers mate.

still on the hunt so see what pops up.

PSJ.