Ph2 Clio 172
Hi,
I am getting a new key fob and key cut and just wondering if the procedure below would register the new one with immobiliser etc? Car is Phase 2 172 '03 plate. My apologies if in the wrong section.
1. Turn Ignition OFF.
2. Press the central door locking button in the car for more than 5 seconds.
Note :the door should lock then unlock.
3. When this happens, 10 seconds is allowed for the rest of the procedure and the immobiliser warning light should illuminate – not flash, illuminate.
4. Point the 1st key at the receiver and press the button twice, the doors should then lock and unlock. Repeat this for other remotes as required.
5. Check that the remote control unlocks and locks the doors.
Have tried searching and found something similar, but not a definite answer.
Thanks
I am getting a new key fob and key cut and just wondering if the procedure below would register the new one with immobiliser etc? Car is Phase 2 172 '03 plate. My apologies if in the wrong section.
1. Turn Ignition OFF.
2. Press the central door locking button in the car for more than 5 seconds.
Note :the door should lock then unlock.
3. When this happens, 10 seconds is allowed for the rest of the procedure and the immobiliser warning light should illuminate – not flash, illuminate.
4. Point the 1st key at the receiver and press the button twice, the doors should then lock and unlock. Repeat this for other remotes as required.
5. Check that the remote control unlocks and locks the doors.
Have tried searching and found something similar, but not a definite answer.
Thanks