ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Picked up Yozza

Car  Bus Winker
Collected my Yozzasport exhaust today.

Got it for £300 used.

From the picture is there anything else I will need?
I assume I am going to need some bolts, which ones will I need to get?

Thanks,
STRBramley

6238031614_252b0eb13c_b.webp
 
I would recommend 2 new rear exhaust brackets and the one in the middle aswell, go for genuine btw. Also, a new cat fitting kit for your decat and if your are fitting it yourself, use high temp silicone and not exhaust paste etc.
Enjoy the drone;)
 
I would recommend 2 new rear exhaust brackets and the one in the middle aswell, go for genuine btw. Also, a new cat fitting kit for your decat and if your are fitting it yourself, use high temp silicone and not exhaust paste etc.
Enjoy the drone;)

I have two new rear brackets and a new cat fitting kit. I'm just not sure what bolts I will need to buy for the extra connection from the backbox to the centre pipe.
 
I'd use some 8.8 or 10.9 bolts with the correct diameter (measure the holes) and you'll need high temperature silicone for the flanges aswell.
 
I've already got a decat on my standard exhaust which looks the same as the one on the yozza. Will I be able to use my current decat with the yozza or is it slightly different?
 
Fitted it this morning. All went well and I put some bigger washers on the heat shield while the exhaust was off as two of them had worn away.
Loving it so far, gives a really good sound. Its loud but not too much.

Hardest part was sawing the old exhaust in half.
 
Get a video up as well. Well done on what I can see as a bargain!!!

Been awhile but I decided to try and get a video today. Bit busy so couldn't really do much and the sound isn't great on my phone. :S



Nothing really happens until 1.30.
 
Last edited by a moderator:
Confused. :S
If you mean the sound then its poor quality.
]

i mean on the first picture you posted the tailpipe (as in the very end of the exhaust) near the bottom of the picture looks like its just been welded in place.

my question is, is it a dummy tailpipe? or is its only purpose to look good?
 
]

i mean on the first picture you posted the tailpipe (as in the very end of the exhaust) near the bottom of the picture looks like its just been welded in place.

my question is, is it a dummy tailpipe? or is its only purpose to look good?

Ah right. They both work. If you clean them you notice water comes out of the other pipe when you wash it down with hosepipe.
 
I thought you meant THE Yozza... I was going to tell you to watch your back.

He's a biggun.
 
Back
Top