prorace 1.2's / 16" - ET30!!

[ant]

seems thats the largest offset in 4 x 100.

anyone know any different?


how they going to handle when they should be ET48???!!!!!!

 

[Turkish]

ET30?? you lowered or planning to lower at all? if so i'd say you are going to trash the wings, 1/4s and tyres.

 

[ant]

apex springs are on their way -40mm.


im sure someone on here is running 16" 1.2's though?

 

[Turkish]

Not in a ET30 offset though, i would guess they are running something around an ET38-42.

 

[Djw John]

Are they not quite likely to stick past the arch slightly? If so then its illegal. Dunno if they will, just wondering.

 

[miketheman2k]

...and it will tramline like a...tram!

 

[ant]

you've mis-understood me!

according to their website they only do 16" 1.2's in

e+15/23/25/30 ??​

i want et38. see my problem?

 

[Turkish]

Yup i see the problem, you need to either A. talk to someone at rimstock and tell them the spec as websites are frequently out of date and/or innaccurate B. Choose a set of wheels that are made in the correct (or within 5mms of it) offset.

 

[ant]

well according to a place near me [dave sheldons] they were made in et 38 and 16".

 

[haitch]

order direct from rimstock and get them in any offset you want, ET38 to ET45 work for definate as ive tried (full fat down 40mm ish), ET30 will cause problems. as mr Loony says stay close to your standard offset for minimal problems as you can always use spacers if need be. (172mk2 standard offset is 48.5).

 

[haitch]

most of these wheel & crap tyres places dont realise there are 4 different offsets for the RS models.

 

[jamesy]

my mate has a set in 4x100 with a 38mm offset and there 16"s