Re-wiring under the front seats - best option?

[Rob669]

I'm fed up with taking large relatives home in my car only for the SERV/Airbag lights on the dash to come on, so it's time to sort out the wiring under the front seats. It's a Ph1 172 BTW.

I've tried putting electrical tape round the connector and the wires to hold it all in a bit better but it still isn't 100% fixed. I don't want to start soldering anything, so would those electrical block connectors do it? What have other people done to stop this from happening.

Cheers, Rob669

 

[BrianR]

Use a cable tie to hold the two halves together.

 

[Rob669]

Thanks. Do you mean along the connector's long axis (if that makes sense?).

Rob669

 

[BrianR]

Yes, just feed it through the centre line of both halves, between the wires and tighten up. Cut off the excess and that will stay put.

 

[Rob669]

I'll give that a try.

Cheers, Rob669

 

[BrianR]

I'll give that a try.

Cheers, Rob669

Like this,

View attachment tiewrap2.bmp

 

[Rob669]

That's a good drawing. Thanks for clarying it.

 

[Rob669]

I mean't 'clarifying'. Must be late.

Rob669