ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Rojer's 200T

Car looked fantastic on track, shame I didn't get to tag along as a passenger, one of the downsides of sessions I think.

What pads did you have in it? The PBS Prorace? I found them quite wooden in my Clio as well and only seemed to be good for a couple of laps before overheating.
 
Car looked fantastic on track, shame I didn't get to tag along as a passenger, one of the downsides of sessions I think.

What pads did you have in it? The PBS Prorace? I found them quite wooden in my Clio as well and only seemed to be good for a couple of laps before overheating.

Yer prorace, they were great after they got hot and then cooled off again. It would have been great to take you out. Hopefully it won't be too long before the next track day. Although I have been looking at semi slicks 🤣
 
  • Love
Reactions: MLB
That will be another massive step up, I went from PS3 to RSR to AR1 on the Clio and every time it was an eye opener how much more speed I could carry through corners. You'll love it!
 
Managed to win some cheap track wheels on eBay. I say track wheels, they are from a Hyundai i40, but for £130 they will do nicely. 17x7.5J ET 46Freshly powder coated, just need to sort out some new wheel bolts as I think I will have to remove the spacers due to the offset.

Screenshot_20260726-191032.webp
 
Drove to Devon last night, 9 hour round trip to collect these wheels and three are bent. Spoken to eBay and will go through their channels. £84 per wheel to get them straightened so that's a no go. On the look out for another set before the track day. I should of held off ordering the tyres, oh well.

PXL_20260729_085800613.webp
PXL_20260729_085743588.webp
PXL_20260729_085705348.webp
PXL_20260729_085659051.webp
 
@Rojer I Will take Photos of them in the Morning, I have just spent ages trying to find photos in my album but can't.

From Memory they are 114.3 PCD & 17 x 7 with 47 offset but will double check in the morning.

This is when I trial fitted one to my i20N in March but they are no good because the centre bore is 1mm too small.

I have had them stored in my garage since 2017.
IMG_1841.webp
IMG_1843.webp
 
@Rojer As Promised here are some photos of the wheels, I was slightly out with the offset as it's 49 not 47. A quick online check has the PCD as 5 x114.3 which I think ties in with the Clio & is the same as my i20N.
One has a very small amount of curb rash, Would you be happy with £40 just to cover the scrap Value of them? If so PM me. They aren't perfect but not shabby by any means.
IMG_3566.webp
IMG_3565.webp
IMG_3564.webp
IMG_3563.webp
IMG_3562.webp
IMG_3561.webp
 
Back
Top