Rollin roads

[Clioste]

]Done a rollin roads today on my 172 cup my bhp was read at 181bhp which was good torge was 627nm and we got it up to 7500 rpm ain't have got a vid of it

 

[Dan@SJM]

FLOL @ the 462lb-ft 172. Proper dream land.

 

[DaveDreads]

Was it K-Tec's rolling road by any chance?

 

[MartinR]

And??

627nm of torque. Take it to a drag strip as that must bloody shift lol.

 

[Dan@SJM]

Was it K-Tec's rolling road by any chance?

I think this is a little optimistic even for those lol.

 

[Knuckles]

You must have some amazing tyres!

 

[DaveDreads]

I stopped going to rolling roads after I was told I was 8bhp down on the last time,
despite doing nothing to the car other than a service.

 

[George182]

I only have 270lb-ft

 

[Clioste]

I went rrs rollin road service they are really good and all the readings are smack on I'm tekking it to shakspear next month and yes it dose shift beat x5 fiesta st modded and few others

 

[JackD]

 

[Dan@SJM]

All the readings are completely fictional if yours has 627nm.

 

[Knuckles]

I went rrs rollin road service they are really good and all the readings are smack on I'm tekking it to shakspear next month and yes it dose shift beat x5 fiesta st modded and few others

Rolling

Did you come here from VXRo or renault uk?

 

[hilldawg172]

Give him a chance guys. He must of made a typo here. He can't possibly have a printout that reads 180bhp and 627nm lol.

 

[Knuckles]

Give him a chance guys. He must of made a typo here. He can't possibly have a printout that reads 180bhp and 627nm lol.

Somewhat of an understatement?

 

[Clioste]

I'll take a pic to prove that it was 181bhp and 627 nm

 

[Chi]

I'd stick a towbar on it

 

[DaveDreads]

I'll take a pic to prove that it was 181bhp and 627 nm

We're not doubting the readout you've got or calling you a lier, rather the place that gave it to you,
unless you've got a couple of grands worth of power mods you've not mentioned?

 

[Clioste]

It's been mapped which forgot to say

 

[Jack-C]

I need this remap

 

[Feirny]

Wow. How does the clutch cope with all that torque? Standard clutch?

 

[Knuckles]

 

[Dan@SJM]

We're not doubting the readout you've got or calling you a lier, rather the place that gave it to you,
unless you've got a couple of grands worth of power mods you've not mentioned?

£20k+!!!

 

[hilldawg172]

We all need this remap lol.

 

[DaveDreads]

It's been mapped which forgot to say

So is mine, with a Piper stealth exhaust, matched inlets and V6 airbox with Pipercross filter,
and the first time mine was on a dyno it made 173bhp,
the next time a year later on the same rollers it made 165bhp,
despite nothing changing on the car.

If you went to a different place I bet you'd get a completely different figure.

 

[Spinksy]

It's been mapped which forgot to say

A remap will not take an otherwise standard 172 to that sort of Torque

Any other mods at all? Or just a remap that adds 9bhp* and stupid amounts of torque?






*If your 172 if one of the lucky ones that actually came with 172 as standard...

 

[hilldawg172]

You would need at least 400bhp to make torque figures like that lol.

 

[Dan@SJM]

Tbh chips bent rods at 300lbft, so it needs forged internals. And forced induction.

 

[Knuckles]

People, people. Hold comments until we see this map.

 

[Clioste]

It's stranded clutch it's 627 Newton meters ain't that high really

 

[Jack-C]

Yeah ok. As long as your happy with how the car drives that's all that matters.

 

[Clioste]

627 Newton meters is 141lbf square meter and 181bhp is right because I know a few lads have been there and other places and the reading am the same this ain't no cheap roller kit it's expensive set up

 

[Clioste]

141 square pounds ain't that high really

 

[Clioste]

Plus I can beat x5 3.0l ones can't leave em but can just sit past em and st's

 

[Ranter22]

141lb-ft is about 190nm not 627.

 

[Adam G]

Must have one of those forged water pumps.

 

[Clioste]

I done a converter and that's what it came to so maybe the converter was wrong then I was only going off that

 

[Adam G]

Nissan R35s etc are in the 600s, so think you're converter was up the swanny.
Welcome to the forum but for future ref, rolling road figures are taken with a pinch of salt on here generally.

 

[MartinR]

I wont buy an st now. Thanks for proving how crap they are innit.

Cheers.

 

[SharkyUK]

A friend's MTM-tuned Audi had circa 620nm (460 lbft) torque. But it also had 550 horses to go with it. I would definitely say something is amiss here.

 

[Dan@SJM]

1nm is 0.74 lb-ft.

So 141lb-ft would be 191.17nm