ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
'SERV' light and Airbag light on together mk2 ph2
- Thread starter AlexS
- Start date
VX220 lightning
I only seem to get this when driving at high speeds... i.e. 120+
Been posted here
Common Clio problems
http://www.cliosport.net/forum/showthread.php?t=108607
and posted time and time again the answer noone takes any notice of these threads though
http://www.cliosport.net/forum/showthread.php?t=187984
on your private road of course....lol
Cheers edde, i did a search but i couldnt find the solution.
VX220 lightning
i have this problem! they want £70 + vat to fix it. i said well if you know about the problem then why isnt it done free? they say some cars just have gremlins.....well if you know about it...its a common problem.....
just signed up and wont let me see the the common clio problems page (http://www.cliosport.net/forum/showthread.php?t=108607) anyone got a direct link?
would rather do it myself the pay out, cheap i know
many thanks
just signed up and wont let me see the the common clio problems page (http://www.cliosport.net/forum/showthread.php?t=108607) anyone got a direct link?
would rather do it myself the pay out, cheap i know
many thanks
Clio MK 4
i only have this prob when my gf flings all her s**t around her seat. quick wiggle and its sorted
Seat belt warning light
The SERV and AIRBAG lights come on its a common problem (almost every has it) its due to the wiring of the pretensioners going to an open circuit. Fiddle with the wires under the seat an the problem will go away.
On the early cars the solution is to look under each of the seats. You will see a grey connector.
On the passenger side disconnect it and cut the Blue and Brown wires off both sides. Then solder the Blue wire to blue, and the Brown to the other brown. Make sure you use insulating sleeves over the soldered connections..
Under the driver seat there are two pairs of wires in the grey connector.. Only cut the Blue and Brown wires and solder them together as above.. Reconnect the connector..
On the facelift cars it is ONLY the passenger side connector that is affected.. So again cut and solder the Blue and brown wires.
Vauxhall Astra SRi 2.0
cut the wires and soldier them back together stops the problem forever
i was just about to say that lol peugeots have exactly same problem cut the connector off the wires and solder thm back up just means u have to unsolder them when u need to remove seats and solder back in when u put them back in
Nope not a Clp problem as you said no side airbags on them.
I had this problem (as everyone else). The airbag and serv light came on when the seats were folded forward for access to rear seats, or if the seat was moved forward/backwards. I cure it by disconnecting the connector under the seat and then re-connecting it, seems to have done the trick.....for now.
...............me too, i picked my car up today, fiddled with the seats and put some optimax in, when i came out of the garage the light was on....so it was hopefully me messing around then!
much thanks alex s
and everyone else
incidentally my car is flipping brilliant, what a car! i love it
perhaps we should make this a sticky
its a great thread
i simply pulled the yellow clips out then disconnected the grey connectors then clipped them back in place and locked with the yellow clip fastners
after this my serv and airbag light when out
great tip guys
nice1
its a great thread
i simply pulled the yellow clips out then disconnected the grey connectors then clipped them back in place and locked with the yellow clip fastners
after this my serv and airbag light when out
great tip guys
nice1
Lots of Alfas
The wiring connectors for the pretensioners is in the same place and if the connection is dodgy that will cause the airbag light to come on.
Sorry to bump an old thread, just thought would be wise to post it all in one section.
I put in some different half leather half alacantra seats in my car yesterday but the previous owner has cut off the connecter (as they are s**t) and hard wired them. I un did all his handy work and attempted to hardwire them back again but now I have SERV and the Airbag light on Also when putting in the passenger seat there wasn't a connecter for the pretensioner... is this right?
I put in some different half leather half alacantra seats in my car yesterday but the previous owner has cut off the connecter (as they are s**t) and hard wired them. I un did all his handy work and attempted to hardwire them back again but now I have SERV and the Airbag light on
Also when putting in the passenger seat there wasn't a connecter for the pretensioner... is this right?Similar threads
