Sponges brakes after fitting brembos

[cs_dave]

ok I fitted a pair of 197 brembos to my 182 bleed as std osr nsr osf nsf ran a litre of fluid threw but driving today they are spongey after a few brake checks the abs light serv light and traction popped up turned ignition off and on no more lights. I didn't let the res run low what have I cocked up on. This is a mod I've done on a few cars never ad this issue

Thanks

 

[car.crash]

Air in the abs pump unless you crimped the lines.

 

[barnesautos]

Get one of these .
Great bits of kit .

 

[cs_dave]

Air in the abs pump unless you crimped the lines.

I didn't crimp as fitted custom lines for the front left the nipples open on the brembos to let fluid come threw pre bleed. This is going to be a mare ain't it :-(

 

[Gus]

You will need to give them a good work out, and bleed them , will probably need to do this a few times.
Other alternative is to use Clip to open the ABS whilst you bleed.

 

[JB21]

Just go out and get the ABS to fire 4-5 times and re-bleed, may have to do this a couple of times. I've ran my pump totally dry twice now and this worked both timed.

 

[stonejedi]

Air in the abs pump unless you crimped the lines.[/QUOTE

Just go out and get the ABS to fire 4-5 times and re-bleed, may have to do this a couple of times. I've ran my pump totally dry twice now and this worked both timed.

THIS!!!:up:.SJ.

 

[cs_dave]

Will go a gravel road and lock them up then lol. Cheers lads

 

[car.crash]

Wet grass also works.
Find a nice golf course and pick a green.