Steering wheel question?

[PYE21]

Im trying to change the wheel in my 182 and am struggling to get the cover off, where abouts are the clips and is there an easy way to get it off?

 

[Turkish]

They're on the back of the wheel on the spokes. All you need is a flat blade screwdriver to ease them off. Make sure you disconnect the battery 1st though.

 

[PYE21]

Battery is disconected will go and have a look now.

Cheers

 

[PYE21]

I have fitted the wheel now, but both the service and airbag lights are on. I have fitted 3.3 ohm, 1.6amp resistors to both the airbag connectors(as in the pic, http://i111.photobucket.com/albums/n130/renaultsport/Random 172 Bits/SteeringWheelRemoval4.jpg) and the lights are still on! Any ideas why?

 

[christurbo]

Hey thats my pic lol

If you found that pic then you must have found my guide>?

Mine did the same so I just covered up the cavity where the leds go in the binnacle - guide is also found in my website.

<-------------------------- All found here

 

[PYE21]

Sorry, forgot to say i had used your pic. The guide was very useful once i had read it properly!!!!

I also have the traction control light on all the time, don't know why, surely that has nothing to do with the controls on the wheel?

 

[lemonnobby]

yea you have to reset ur steering wheel angle only done at renault for the tracion control light, speak to edde about the resistors.

 

[christurbo]

YOu can try and put the resistors directly into the large connector which sits sirectly in the cowling.... I tried and still didnt work.

Best bet is to cover the recesses in the cowling.

Traction control light will be due to the sensor behind the wheel.... as stated Renault will sort it.