the 182

[jimmy182]

 

[Wazza182]

Nice effort Jim, what suspension are you running?

 

[jimmy182]

gaz mate with ast top mounts

 

[Jon.G]

Nice stance.

 

[Wazza182]

Running some nice camber on the rear, and the whiteline arb for good measure. Very nice and a great colour

 

[stephen chadwick]

looks ace! what have you spaced the wheels by? and rear camber?

 

[mr.pink87]

Nice stance.

+1

 

[jimmy182]

Its 1.5 degree and 25mm at each side

 

[.Andy.]

25mm spacers on all corners? Looks fecking awesome!

 

[jimmy182]

15mm on front 25mm on rears

 

[Kane.]

Lovely stance :approve:

 

[JCC]

I like the stance a lot.

 

[Hodgins]

Love it! Think im going to get spacers and debadge the renault sport

 

[Tigger]

Love it! :approve:

Which spacers did you go for mate?

 

[Leeshez]

Very nice indeed.

 

[robbygraham]

Looks really nice, but whats with the cup badge on the back? and no cliosport sticker

 

[Mark-172]

Stance is immense, looks perfect

 

[harry289]

Stance is immense, looks perfect

+1 on that. Great colour, lovely shine and a decent suspension set up.

 

[Jon.G]

Looks way more than 1.5 on the rear. :/

 

[Kieran..]

cool stance! i was thinking of doing this with the turinis, does it ever scrub?

 

[Cookson]

Looks properly lovely

Are the spacers hubcentric jobs?

 

[Gandi69]

Looks tidy but i'm not a fan of the spacers myself,

 

[ElkWorks]

swap the spacers front to back, and you'd be on to it imo.

lovely motor fella. looks real nice.

 

[Cunney]

Looks ace mate, presume you can't go over 5mph around corners though?

 

[Cookson]

Looks ace mate, presume you can't go over 5mph around corners though?

Why?

 

[stephen chadwick]

to pick your brains again what spacers did you use?

 

[ROB91]

Love it, that stance is perfect

 

[Kimitech]

Looks cool, but the "A" stance is not good...all the chassis gets hurt, thanks thick spacers. I know, what I´m talking about (spacers producer).
But its your choice.

 

[Cookson]

Looks cool, but the "A" stance is not good...all the chassis gets hurt, thanks thick spacers. I know, what I´m talking about (spacers producer).
But its your choice.

Can you explain further?

 

[Dunn]

Why?

Can you explain further?

Adding spacers on Front or Rear can increase oversteer and understeer respectively
on the front as your wheels are further out you can have increased wear on track rods wheel bearings etc

apparently

 

[Sir_Dave]

I'll go against the grain. I hate 'stance'.

In addition, thats considerably more than -1.5 degrees on the back lol, mines -1.8 and looks nowhere near that broken.

 

[Cookson]

Adding spacers on Front or Rear can increase oversteer and understeer respectively
on the front as your wheels are further out you can have increased wear on track rods wheel bearings etc

apparently

Not that I am saying you are wrong, but I dont understand how adding spacers can affect over/understeer?

Granted, the geometry will change, but surely this is altered when it's tracked up after the additions? I can sort of understand a whider front end would cause oversterr from the rear, but it has spacers all round.

TBH, I'd love to see how it drives/handles

 

[Cunney]

Why?

Because it's so low, so unless they're ultra fim they'll rub constantly.

That's why I hate my k-tecs, can't throw it round a round about with constant rubbing and it isn't that low

 

[Cookson]

Maybe it's set to stiff. Doesnt look overly low to me either

 

[Arctic_182]

looks

 

[Turkish]

Way too much poke at the rear (not a fan of reverse stagger on FWD cars, looks daft) and as said above that's way more neg camber than you're suggesting. I was running about -2 at the from on my 182 when I had the H&R's fitted and it looked nowhere near as much as that.

 

[George@RTR_Parts]

Scrubs up alright for a CAT C you pumper

 

[Bramley]

Im starting to like black ones more nd more. nice car

 

[Sam]

I really like that. I think it would look better without the cup badge but thats me.

Sam!