Toe setting for track car.

[PBCup]

My track toy is almost done, just needs tracking sorted. I've been told the standard setting may not be the best for a track car. Summat about being completely straight rather than toeing in.

My setup is 172 cup shocks, Eibach pros and camber bolts which I'm looking to have set at neg 1.5.

Cheers

 

[mr.pink87]

I am running a tiny bit of toe out (about 5 minutes per wheel).

 

[BIGASH]

I am running a tiny bit of toe out (about 5 minutes per wheel).

+1 ish

 

[sonny172cup]

think im running about 10 min toe out per wheel and -2.1 neg camber. wheel check data sheet.

 

[jamesv6]

I'm also running -2.1 camber and 5 minutes toe out per wheel.

 

[Kelv]

Im running toe to the factory settings and 1 deg camber for now.

still lovely for driving to/from trackdays and felt lovely for me for a good dozen laps at the ring last weekend.
this is a starting point for me tho, as time progresses I will experiment with settings that suit me

 

[Chip-mk1]

I normally run ours parrelel, tiny bit of toe out works ok as well though, toe in tends to make them too understeery.