toruqe settings on mk1 clio 1.4

[Devilish]

would any one know what torque the headbolts need to be on the clio there isnt anything in the haynes manual.

thanks

 

[edde]

I'm sure I posted this recinetly

Tigthen all to 20NM
Angle tighten all to 97 degree +-2 degree
3 minutes to wait
Slacken bolts 1 and 2 fully
Tigthen bolts 1 and 2 to 20NM
Angle tigthen 1 and 2 to 97 degree +- 2 degree

Slacken bolts 3, 4, 5, and 6 fully
Tigthen bolts 3, 4, 5, and 6 to 20NM
Angle tigthen 3, 4, 5, and 6 to 97 degree +- 2 degree

Slacken bolts 7, 8, 9 and 10 fully
Tigthen bolts 7, 8, 9 and 10 to 20NM
Angle tigthen 7, 8, 9 and 10 to 97 degree +- 2 degree

This is the order of the bolts as viewed from above as such.

8 4 1 5 9
cambelt end
7 3 2 6 10

PS it is in the Haynes they all are you could have looked a bit harder.