TPI Polarised Wheel Bolts, If your fitting 25mm spacers? (Clio 200)

[anthonymayow]

AS a few might of seen just picked up my 200 Raider...

Wondering just looking at a set of H&R Wheel spacers 25mm, or maybe ktec (not sure if much difference). and wanted polarised bolts, what length would i need? and size info for when im looking?

cheers anthony

 

[Gorms]

Standard size as long as the spacers are hubcentric (spacer bolts on the hub then the wheel bolts onto the spacer).

Standard spec for the wheel bolts are;
m14*1,5mm 60 degree cone seat
27mm thread length
19mm head

 

[Gorms]

These are the spacers you need it you are going for 25mm

http://www.larkspeed.com/index.pl?a...o-Mk3-Sport-R-Eibach-Pro-Spacer-Wheel-Spacers

 

[anthonymayow]

Thanks a lot, so just standard size tip bolts will be fine? Cheers or help I thought it would go though both novice mistake!

 

[anthonymayow]

These are the spacers you need it you are going for 25mm

http://www.larkspeed.com/index.pl?a...o-Mk3-Sport-R-Eibach-Pro-Spacer-Wheel-Spacers

Just looked, seem pricey for only a set of 2? If I'm reading that right, could get 2 set of 25mm h&r spacers for same price? Guess they are same?

 

[Gorms]

Just looked, seem pricey for only a set of 2? If I'm reading that right, could get 2 set of 25mm h&r spacers for same price? Guess they are same?

Yes sorry my mistake, i now remember why i went for the H&Rs,

http://www.larkspeed.com/index.pl?a...Sport-RS-RS-Cup-Type-R-H-R-Trak-Wheel-Spacers

Still a little pricey, think i paid £180 for mine about 2 years ago but don't think of them like that as i recently sold both my pairs for £120. £60 for the 2 years isn't all that bad!

 

[anthonymayow]

Standard size as long as the spacers are hubcentric (spacer bolts on the hub then the wheel bolts onto the spacer).

Standard spec for the wheel bolts are;
m14*1,5mm 60 degree cone seat
27mm thread length
19mm head

can only seem to find 17mm head, but they are 60 degree seat, and m14x1.5mm, with 27mm thread length... here
Normal Bolts

Locking Bolts ( they are 1mm longer? any reason? )

 

[anthonymayow]

anyone know somewhere cheaper than 619?

 

[RMDavis]

anyone know somewhere cheaper than 619?

Euro's sell them bud. That's where I got mine from, unsure on price you'll pay as I bought them whilst I worked there. As for fitments with spacers I used 27mm for the fronts (I think) as they were bolt on spacers.
As for the rear they also make 50mm bolts which is what I used with 20mm spacers and they fitted perfectly.

Hope this helps?