mattcreed barnesautos Removed the windows with proper cheese wire thatbsreen fitters use. To a minute or two a side to do. Fitting the rears was a bit of a pain as the Clio glass actually sits on a ledge towards the front of the quarter meaning there is a need for slightly larger build up of sealer. Once I noticed that it was pretty easy.
Also a little note... Remove all interior trims before doing the Windows. I am actually going to trim all the interior panels slightly as my Windows fit lovelly and flush in the holes and the interior parts would touch them.
The fronts were just slid in place there but where the channel is at the top of the door where the weather strip goes on the inside you can easily drill through there straight into the Windows and that will fix them very well. Also it will leave no signs of damage if at anytime you wanted to put the original glass back in.
Also a little note... Remove all interior trims before doing the Windows. I am actually going to trim all the interior panels slightly as my Windows fit lovelly and flush in the holes and the interior parts would touch them.
The fronts were just slid in place there but where the channel is at the top of the door where the weather strip goes on the inside you can easily drill through there straight into the Windows and that will fix them very well. Also it will leave no signs of damage if at anytime you wanted to put the original glass back in.