What oil do I need to re-oil my ITG panel filter?

[Paddy_g46]

On the ITG website it says to use their oil but I didn't buy the filter so dont have any! Any ideas fo what I can use or where I can get it? Could do with it today aswell if possible!

Patrick

 

[iimushroomzii]

Vegetable

 

[Paddy_g46]

Vegetable

seriously?! :S

 

[DannoTheGreat]

extra virgin?
or you could get some k+n, pipercross etc oil. its all the same stuff

 

[en035]

K&N filter oil will work for your case. ITG filter does not like water that much, so do not let it soak in water for prolonged times.

 

[stan*]

Filter oil from a motoX shop is probably cheaper and more easily available. Or if you are feeling a bit pov, 2stroke premix oil is usable.

 

[mugglesquop]

WD-40

 

[geesus69]

http://www.merlinmotorsport.co.uk/I...-Dust-Retention-Spray/c432_436_444/index.html

 

[sideways danny]

WD-40

not really any good. Not sticky enough. Wurth do a good spray

 

[renno]

what you want is JDR2 OIL from itg.merlin motorsport are very good.you will have it in a day or two.DONT GET JDR1 as this is very thin and only for the track (just one race).wash your filter in a tray of petrol about 20mm deep once or twice,then wash with soapy water and let it dry for 24hr.then apply JDR2 and massage in useing your fingers.job done.do not use K&N OIL IT IS NOT MADE FOR FOAM FILTERS.

 

[Martin_172]

WD-40

why would you use WD40 it drys up?! be useless after 20 minutes lol